|
| XFWAGON |
|
|||
|
I found this on the weekend while trawling for easy ways to mount my oil temp and oil press. senders, looks pretty good.
Would any one not recommend using one? Would the placement of the senders here provide reliable info? I'm also wondering if there are other brands out there, as this place wants $32 for freight. http://prosportgauges.com/oil-filter-adaptor-plate.aspx Edit: on further looking I found these too: http://www.ebay.com/itm/ADD-Oil-Filter- ... es&vxp=mtr http://www.ebay.com/itm/OIL-FILTER-SAND ... es&vxp=mtr |
|||
| Top | |
|||
| Shortshift |
|
|||
|
I'm using one for oil temp and pressure. It's a good way to compare the pressure at the oil pump and in the block (if you have a gauge in your instrument cluster). I found that teflon tape on the brass fittings & plugs leaks under pressure. Hence, I use low strength Loctite as a sealer.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| dahayes |
|
||
|
Is there much difference in the readings?
|
||
| Top | |
||
| Shortshift |
|
|||
|
{USERNAME} wrote: Is there much difference in the readings? I get 0-1 bar difference. The pressure difference happens after the engine warms up. After trying twice to get a fitting that easily screws into the block, I gave up and used one of these sandwich plates. Then, there's the question of how accurate the dash gauge is.  At least I can see when there's a problem with the oil pump pressure.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| dahayes |
|
||
|
They could definately be handy in a few applications. Which size would be suitable for an I6?
|
||
| Top | |
||
| Shortshift |
|
|||
|
I just went to Autobarn and asked for one to suit a Z9 oil filter.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| Shortshift |
|
|||
|
double post
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection Last edited by Shortshift on Tue Nov 08, 2011 1:05 pm, edited 1 time in total. |
|||
| Top | |
|||
| dahayes |
|
||
|
Cool thanks mate
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
