|
| Tech90 |
|
||
|
So I notice I've got an EL/AU hybrid head on my EL, and I bought a Wade 1673 regrind cam that was out of an e-series not too long ago. Just wanna know if it could be fitted to this head still.
Cheers. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
no it wont work . ive heard u can use el rocker gear (non hybrid) and it apparantly works
_________________ El XR6 Turbo |
|||
| Top | |
|||
| splosh123 |
|
||
Age: 34 Posts: 168 Joined: 3rd Dec 2009 Ride: Falcon EL Option 20 Location: Redcliffe, Brisbane |
ef_falcon_95 wrote: no it wont work . ive heard u can use el rocker gear (non hybrid) and it apparantly works This is correct, ran my hybrid motor with this combination. |
||
| Top | |
||
| Tech90 |
|
||
|
Cheers guys.
How about from an EB head? I got one sitting around that's not being used. |
||
| Top | |
||
| GeZza200 |
|
||
|
give Wade a call and see if you can swap the cam over with a 1671AU cam, which is the AU version of the 1673.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Tech90 |
|
||
|
Not too sure if that will help since I bought it second hand off a forum member.
Do I need to change the valve springs or anything else? I still plan on using the rocker gear from my old EB head, that should work fine, right? |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Valve springs aren't neccessary . But if you taking the head off I'd throw in some crow xr springs .
Eb rocker gear should work . When u put it together turn it over by hand to check everything rotates as it should . And check the tappets are pushing down on the valves . If it turns fine . Start her up and see how it runs . If its running rough the valves aren't opening properly
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 93 guests |
