|
| ea_falcon |
|
||
|
will a stock explorer plenum bolt straight up to the lower elderbrock manifold to give the engine a stock look? also will it fit onto the EGR\ throttle body
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| XR9UTE |
|
||
|
Nope.
|
||
| Top | |
||
| ea_falcon |
|
||
|
it should fit the lower manifold?
Why wont it fit the throttle body? cheers
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| XR9UTE |
|
||
|
An Explorer upper won't fit an Edelbrock lower.
The throttle body will bolt onto the Explorer upper. Of course, as I said before, the stock 65 or 70mm t-body will give better performance so you may aswell use the stock t-body. |
||
| Top | |
||
| ea_falcon |
|
||
|
is it a different stud pattern or different size all together because i just need it to bolt on to get the defect off.
i cant find an au manifold anywere do u think an ef or el should be fine to use?
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| XR9UTE |
|
||
|
It's all completely different, port size, shape, arrangement and bolt pattern....I wouldn't say you can't bolt it on if you could.
A std EB-L HO intake will be acceptable but, if you go to a different inspection centre after you've ground off Edelbrock and put one of those stupid plastic covers that some of those cars had you'll probably find it'll pass....they're dumber than dumb. |
||
| Top | |
||
| ea_falcon |
|
||
|
ok cheers for that mate i think ive scored me an 185 kw el manifold r they still the explorer ones? ill put it on anyways at least it will look stock
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 34 guests |