|
| StevenBruzz |
|
|||
|
Ok. I know this topic has been covered before alot, but i want my specific problems identifyed
I believe its just s**t fluid When warm it will slip gears n shunt if over about 1500RPM Few months ago after going to nowra the transmission cooked the oil and came out sumhow a frozen coke from maccas kinda look but was topped up to get home but i jus did a pan change but oil still looks brownish im jus wondering if its the bands s5 or just oil, idnt wanna flush it to find out its the bands n have to buy more fluid again for bands n s5 i plan on getting the guys from bullit transmissions to lOok at it How much will this cost to fix ? I kno a flush is about $120 to diy But how much are bands and s5 to b done also can i do them myself |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
{USERNAME} wrote: Ok. I know this topic has been covered before alot, but i want my specific problems identifyed I believe its just s**t fluid When warm it will slip gears n shunt if over about 1500RPM Few months ago after going to nowra the transmission cooked the oil and came out sumhow a frozen coke from maccas kinda look but was topped up to get home but i jus did a pan change but oil still looks brownish im jus wondering if its the bands s5 or just oil, idnt wanna flush it to find out its the bands n have to buy more fluid again for bands n s5 i plan on getting the guys from bullit transmissions to lOok at it How much will this cost to fix ? I kno a flush is about $120 to diy But how much are bands and s5 to b done also can i do them myself the solenoid you can shange yourself, the bands you cannot. I just had a box built and pickied it up yesterday, BUT for a 6 banger falcon, the boxes were about $900 exchange, some times its worth finding a known good box and dropping that in instead. gotta justify the expence of a box when secondhand ones are dirt cheap. With the solenoid, I would still pay a transmission guy to do it. I hate all things to do with auto gearboxes!
_________________
|
|||
| Top | |
|||
| paul w |
|
|||
|
Okay, I'll bite.
How on earth does an auto transmission 'cook' the oil? I can understand it if towing a heavy caravan up a steep hill in 40 degree heat, but on a trip to Nowra? Was the oil crap to begin with? Poor auto service history? Design fault? http://www.youtube.com/watch?v=jGkG0fZbprk
_________________ EF GLi Wagon. Burgundy. Gas shocks. Rear sway bar. Nice stereo & speakers. Factory bull bar. Driving lights. Roof racks. Great car. 2nd owner. 147,000km. |
|||
| Top | |
|||
| StevenBruzz |
|
|||
|
{USERNAME} wrote: Okay, I'll bite. How on earth does an auto transmission 'cook' the oil? I can understand it if towing a heavy caravan up a steep hill in 40 degree heat, but on a trip to Nowra? Was the oil crap to begin with? Poor auto service history? Design fault? http://www.youtube.com/watch?v=jGkG0fZbprk No towing i believe it was just dirty oil from previous owner and it sumhow got air into it when it leaked but yeah it was a frothy brown So is it worth getting the s5 replaced, and can i test it now to see if its faulty without dismanteling the car |
|||
| Top | |
|||
| louie0408 |
|
||
Age: 36 Posts: 122 Joined: 21st May 2010 Ride: 1997 EL Ford Fairmont Ghia Location: Brisbane |
sounds like an s5. I have the same problem in my box and the previous box i had. Apparently if they get too hot the s5 dies creating harsh shifts and slipping. A good tell tale sign is if the box is fine when cold and misbehaves when at operating temp. You are looking at $400-$500 for a mechanic to replace the s5. If you leave it too long it will deteriorate and damage other driveline parts. My last one was average when i bought the car and near un-driveable within a year.
|
||
| Top | |
||
| StevenBruzz |
|
|||
|
yeah cheers thats exactly it it sounds like it locks the diff up n then the wheels grab had a few times its spun i jus dunno how imms go when cops see happening?
|
|||
| Top | |
|||
| cjh |
|
||||||
|
Did the pan look like this........
_________________ http://youtu.be/jJTh9F3Vgg0 |
||||||
| Top | |
||||||
| StevenBruzz |
|
|||
|
I didn do the change but il b doin a flush soon
So what if there is metal in it f**k ayy? |
|||
| Top | |
|||
| cjh |
|
|||
|
{USERNAME} wrote: I didn do the change but il b doin a flush soon So what if there is metal in it f**k ayy? This auto was a bit noisy in the planetry's.....it's bushing material. Have you checked the slop in the slip yoke bush in the back of the tranny.????
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| StevenBruzz |
|
|||
|
Havent had on hoist yet
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
