|
Turbo Jimmy |
|
|||
|
Have been looking at the cheap 200-300 dollar coolers on evilbay and going on just the dementions of them they seep to be great value
So my questions to the Gurus are: 1. Whats the matter with them. and 2. Has anybody onhere gone that rout and did you find them better that the stock cooler Thanks in advance boys
_________________ BFII XR6T - Conquer - K&N Pod Filter - Baby seat and Elmo sun shades!!! |
|||
Top | |
Turbo Jimmy |
|
|||
|
Search is you friend Jimmy you f**k wit ( Just thought i would get in before the winger brigade)
I now know what is wrong with them Anyone running one? I just wanna know if they are better than an F6 Cooler (not chancing massive rwkw)
_________________ BFII XR6T - Conquer - K&N Pod Filter - Baby seat and Elmo sun shades!!! |
|||
Top | |
EBXR8380 |
|
|||
|
They all very .. Haven't used the BF type but used generic intercoolers..
I find using a larger intercooler makes up for some inefficiency..
_________________ As in ZOOM 126 edition |
|||
Top | |
Turbo Jimmy |
|
|||
|
Cheers mate I think I will giv em a crack and if its no good I am only 200 bucks out of pocket
_________________ BFII XR6T - Conquer - K&N Pod Filter - Baby seat and Elmo sun shades!!! |
|||
Top | |
bfhoon |
|
|||
|
the problem is that the cheap chinese cast alloy intercoolers are very poor quality and are usually bar and plate coolers that have too much internal fins to provide good flow.
they pack the coolers with internal fins to provide the cooling by making a pressure drop and then dont flow very well. you need to remove the internal fins to optamise flow vs pressure drop to suit the application. im using a plazmaman tube and fin cooler that has been perfectly matched in size and flow for my engine. with lazer welds and hand fabrication of the end tanks the quality far exceeds the cheap chinese counterparts. in my opinion you are better off getting somthing a little more expensive that will last and perform rather than saving a few hundred bucks and having to replace it after a few years. im not bagging the chinese coolers, some people have ordered sparcely finned coolers from china and made a killing selling them to people who swear they are the best bang for your buck but i have been there and done that and have now got 3 cars with plazmaman coolers on them. rav 4 xr6turbo and a twin turbo camaro.
_________________ bf xr6turbo siemens injectors, full plazmaman 800 hp intercooler kit, 5 inch cat and custom dual 2.5 inch zorst, billet flywheel with mal wood clutch kit, braided hoses, big brakes, 3.2L surge tank/w twin 044's rebuilt motor with forged and billet everything 420+ rwkw on 98. holden killer. |
|||
Top | |
fordy4eva |
|
||
|
In the end its what budget can allow for. If you cant afford a plazmaman or other top shelf coolers then they can do fine. Obviously dont expect to go chasing after big power figures. But in the end if your after just after a retune/ mild modifications you should be fine. Plus most of those ebay coolers have 12 month manufacturer warranties on them anyway.
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 58 guests |