|
| Super XR6 |
|
||
|
yeh cracka600 i have run it without the rocker cover on and the oil seems to flow fine through the top of all the rocker arms
and also cheaked the injector by unpluging one at a time no change  have no idear what to do next might try another rocker assembely anyone know if its still safe to drive thou |
||
| Top | |
||
| Super XR6 |
|
||
|
just thought how many of you guys are running extractos
my daily (N12 Pulsar) was makeing a tappet sound i replaced the exhaust manifold gasket and its quiet  might have to give it a go soon |
||
| Top | |
||
| cracka600 |
|
||
|
i uped my idle a bit the other day and now it seems quieter.
i also done the gasket with no change and good luck with the rocker change, let me know how ya go. i did two different rocker assembles and then changed them all around (the arms) with no change in both , so i hope you have better luck than me |
||
| Top | |
||
| Super XR6 |
|
||
|
Yeh mine goes quiet at about 60kmp at around 2000rpm
|
||
| Top | |
||
| cracka600 |
|
||
|
have you done your oil pump , i know people say it not that but i have run out of things to try
|
||
| Top | |
||
| ebxr82nv |
|
||
|
If it goes quiet at the higher revs like you say, it may well be an oil pressure issue.
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| Super XR6 |
|
||
|
The main reason i pulled the engine out was because of oil pressure (had some silicone blocking the hole to the tensonor so it had massive chain slap) thats now fixed ail pressere guage seems to be reading around 3/4 of the way up the guage
|
||
| Top | |
||
| BOSXR8 |
|
|||
|
It must be your valve guides then...
_________________ EB SXR6. ED XR8 Sprint. |
|||
| Top | |
|||
| Super XR6 |
|
||
|
hope not
|
||
| Top | |
||
| Super XR6 |
|
||
|
Ok guys got an update ITS FIXED all i did was take it for a drive Round 20ks and let it sit for the week
im gonna take it to work tommorow and well see how it goes after that |
||
| Top | |
||
| Super XR6 |
|
||
|
ok took it to work today and its still ticking
 im an apprentice mechanic so i took it to work and had some of the more senior tecs take a look out it we have narrowed it down to No6 inlet lifter and they said since i had replaced the lash adjuster 3 times it more tahn likely oil pressure so im gonna grab a guage and see how it turns out
|
||
| Top | |
||
| cracka600 |
|
||
|
good work, keep us updated on how it goes
|
||
| Top | |
||
| kickn_it |
|
||
|
Make sure when you get new lifters you get the retainer fitted to the lifter as the old one disintegrate in the rocker and the lifter can make noise from in the rocker by having a little extra clearance. Maybe a silly reply but are all the shims back in on top of the lifter too?
Cheers Joel
_________________
|
||
| Top | |
||
| Shortshift |
|
|||
|
post deleted
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| Super XR6 |
|
||
|
Yeh joel lv put new retainers on on all my sets of new lifters im gonna get the oil pressure guage from work and go from their
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 89 guests |
