Fordmods Logo

Xr6T block vs N/A block 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: Xr6T block vs N/A block
Posted: Tue Dec 06, 2011 7:07 pm 
Parts Gopher
Offline
User avatar

Age: 36

Posts: 55

Joined: 10th Dec 2009

Ride: BF XR6 TURBO

Location: Melbourne
VIC, Australia

Hi guys just after some advice. I have a xr6t thats going in to get tuned at bluepower and long story short after that im going to need a new bottom end if i want more out of the car. Soooo i was wondering if it would be worth :

Buying a F6 bottom end and building that or

Buying another XR6t bottom end and building that or

Buying a NA 4L bottom end and building that.

Now considering they are all the same displacement and would be getting new rods pistons ect, would it make a difference between the blocks? I would be using my head and accessories if that makes a difference?
Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Tue Dec 06, 2011 7:09 pm 
Getting Side Ways
Offline

Age: 36

Posts: 4183

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia

Blocks are the same mate.

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

OO0Y4 - BA2 XR6 Turbo, Nizpro Plenum, Process West stage 3 cooler, 4” dump, 3.5” exhaust, ID1000’s, ZF Auto - 11.8@116

Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Tue Dec 06, 2011 7:13 pm 
Smokin em up
Offline

Age: 33

Posts: 249

Joined: 18th Jan 2010

Ride: Ford EB GLI

Location: Morwell/Inverloch
VIC, Australia

How much power are you looking for mate? F6 bottom end is good for abit over 400rwkw.
If you were going to get a bottom end built you could build it to whatever power you would like to make.
No point buy an F6 motor and getting it built stronger,May aswell just build ether the motor you have now or build another xr6t motor.

 

_________________

EBT-747 -

Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 12:19 am 
Parts Gopher
Offline
User avatar

Age: 36

Posts: 55

Joined: 10th Dec 2009

Ride: BF XR6 TURBO

Location: Melbourne
VIC, Australia

next week aiming for 340+rwkw with my current setup, looking to the future and it seems that if i want over 400 internals are whats restricting me so yeah just tossing up weather i should slowly build a another bottom end while i use this one for the time being.
Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 1:48 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1349

Joined: 21st Dec 2004

Gallery: 40 images

Ride: EF GLi/Ghia bitsa

Location: Melbourne
VIC, Australia

67RCE wrote:
Blocks are the same mate.

+1
Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 7:00 am 
Oompa Loompa
Offline
User avatar

Age: 34

Posts: 47

Joined: 20th Aug 2011

Gallery: 2 images

Ride: XR6 BAII

Location: Kings Cross
NSW, Australia

Gab1 wrote:
67RCE wrote:
Blocks are the same mate.

+1

+2

 

_________________

2005 Falcon BAII XR6
'Random' Breath tests: 28
Blow-overs: 0
Defect stops: 11
Defects: 6
Breakdowns: 1

Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 7:23 am 
Getting Side Ways
Offline

Age: 71

Posts: 3574

Joined: 11th Jan 2009

Location: Smithfield
NSW, Australia

Recently Joe from CMS changed a bottom end on a BF Turbo and replaced it with the F6 FG one, the mian difference was where the dipstick fits.

FG Short motor, $3000.00 BG 6009 D
Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 7:45 am 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

just grab a cheap 2nd hand block from anything, doesnt matter if your rebuilding it

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 11:15 am 
Parts Gopher
Offline
User avatar

Age: 36

Posts: 55

Joined: 10th Dec 2009

Ride: BF XR6 TURBO

Location: Melbourne
VIC, Australia

53XR6 wrote:
Gab1 wrote:
67RCE wrote:
Blocks are the same mate.

+1

+2


Just asking incase there was a slight difference in places, trying to get the corect info.


Other than that thanks for the help guys :D
Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 12:32 pm 
Parts Gopher
Offline
User avatar

Age: 51

Posts: 85

Joined: 10th Nov 2010

Ride: Ford BA FUTURA 2002Ded Gas Wagon

Location: FRANKSTON
VIC, Australia

What about the Dedicated Gas engine :shock: . Higher compression, and already has the F6 or Typhoon rods in it from the factory. Just add the fuel injection, turbo and a cam? I could be Wrong but isnt that a cheeper way :shock: . Like $700 complete gas engines off ebay. 8-)

Flame me if i'm wrong (most likely) :oops: :roll:
Or make me your king if i'm right. (highly unlikely) 8-) :lol:

 

_________________

I'm constantly surrounded by IDIOTS!!
Guns and Rockets mounted on cars? Vote NOW on Licence reforms.

Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 12:43 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

Jeremy BA wrote:
What about the Dedicated Gas engine :shock: . Higher compression, and already has the F6 or Typhoon rods in it from the factory. Just add the fuel injection, turbo and a cam? I could be Wrong but isnt that a cheeper way :shock: . Like $700 complete gas engines off ebay. 8-)

Flame me if i'm wrong (most likely) :oops: :roll:
Or make me your king if i'm right. (highly unlikely) 8-) :lol:

unfortunatly he wants to push the car further than any of the stock bottom ends will go

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Xr6T block vs N/A block
Posted: Wed Dec 07, 2011 1:44 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 862

Joined: 8th May 2005

Ride: BA Wagon Turbo, Ba Fairlane G220

Location: Colac
VIC, Australia

Papa Smurf wrote:
Recently Joe from CMS changed a bottom end on a BF Turbo and replaced it with the F6 FG one, the mian difference was where the dipstick fits.

FG Short motor, $3000.00 BG 6009 D


This could be interesting Papa. Is that $3000 for an F6 short motor? What sort of power are they rated at? If its over 400rwkw that would be a great way to go about it.

 

_________________

Congo Green Ba Wagon With F6 6 Speed Manual Driveline.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 04, 2024 7:43 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names