Hi All,

This is left over from when I had a BA wheel on my ED Falcon...

Basically it is a horn pad and I removed the BA airbag and tossed it because I did not require it for the ED... EF/EL/AU owners MAY be able to fit the airbag they require inside it...

The cruise control buttons have been modified to suit EF/EL/AU cruise control systems...

I can assist with wiring and a BA plug off a clock spring will be needed to plug into the horn pad, it will need to be soldered onto a EF/EL or AU clock spring to replace the factory plug for the cruise buttons...

The radio buttons are un-modified and worked fine with my PAC-PS steering wheel interface adaptor to control my Sony headunit...

The only thing this does not do... Is turn "off" the cruise lamp... The cruise button turns it on, but I didn't have the circuitry for this to make it cycle between on an off... I never had an issue with not having the "off" feature,,, It turns off when you turn the car off anyway...

And the std Ford logo has been replaced with the Tickford logo which was more suited to the E series I felt and is something a little different...

I'm not even sure if anyone wants this, but is worth a try for someone wanting radio buttons in their car like I did or someone Just wanting to run a more modern wheel...






Not entirely sure what this is worth to the right person... If there is a right person at all... Say $60 plus post but if you think otherwise then feel free to PM me with offers if you feel otherwise...