|
| L.D-50 |
|
||
Age: 43 Posts: 34 Joined: 7th Apr 2006 Ride: AU II XR8 ute but with lucky 220 Location: north coast |
hey guys will a set of ba xr8 injectors fit a au xr8- are they 42lb? will be stroked and tuned 90mm maf, just will they fit the block and fuel rail and clips the same?
And whats the best tuning software for an Au- Livewire flash? and a good tuner who's actually done 10 or so Au v8's in Foster-Newcastle area? thanks heaps |
||
| Top | |
||
| Fairmont_03_5.4 |
|
|||
|
Dunno Mate,
But someone like United Fuel Injection may be able to help you, otherwise id try a performance shop. Good Luck,
_________________ Chaos, Panic and Disorder. My work here is finally done. |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
At there power level I doubt they are 42's..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
Depends on what series AU you are talking about, series 1 had a different plug to everything else, B series injectors are the same plug as E series. Cause the AU injectors are different, FILTHY expensive unless yours is the E/B series style. depends on series as to plug type.
Awesome ford and your wonders of engineering.
_________________
|
|||
| Top | |
|||
| L.D-50 |
|
||
Age: 43 Posts: 34 Joined: 7th Apr 2006 Ride: AU II XR8 ute but with lucky 220 Location: north coast |
{USERNAME} wrote: Depends on what series AU you are talking about, series 1 had a different plug to everything else, B series injectors are the same plug as E series. Cause the AU injectors are different, FILTHY expensive unless yours is the E/B series style. depends on series as to plug type. Awesome ford and your wonders of engineering. Au 2 xr8 24lb blue injectors, for ba xr8 black injectors 42lb? |
||
| Top | |
||
| sly |
|
||
|
All B-series V8's AFAIK use an injector rated at 29 lb. The rating is the same as B-series 6's but the Bosch part number is different. I have a set of these in my boosted AU 6, they fit & work just fine.
Sorry about the thread mine, I was searching for some info I posted months ago. I bought the injectors off Fleabay, they were advertised as being out of an XR6T but after I had them a while I realised they were the wrong colour. When I googled the Bosch part #, it came up as B-series, all V8's.
_________________ AU1.5 Wagon, Raptor ProStreet kit, Pacemaker 4499's with 3" collector, 3" metal cat, 3" pipe, Pex BSO660 & BSO439, BA brakes, Sprintgas mixer LPG system, Airod variable-venturi mixer... stealth FTW Sniper tuned! |
||
| Top | |
||
| EB-5LTR |
|
||
|
so can you use b-series injectors in and AU with the harness adaptor clips from ford motorsport?
And are all b-series v8's 29lbs? |
||
| Top | |
||
| sly |
|
||
|
B-series V8 injectors are Bosch 0 280 156 186 which are used in 24- and 32-valve V8's. Googling the part number finds a Bosch datasheet where I found they are rated at 213 g/min (28.12 lb/min) at 3 bar. Then I found an online calculator {DESCRIPTION} which provides flow rates at different pressures. For example, they should flow 32.47 lb/min at 4 bar (58.8 psi).
As for fitting them to an AU V8, that I can't tell you. Mine are fitted to a 6 and they just fitted straight in using the the stock clips.
_________________ AU1.5 Wagon, Raptor ProStreet kit, Pacemaker 4499's with 3" collector, 3" metal cat, 3" pipe, Pex BSO660 & BSO439, BA brakes, Sprintgas mixer LPG system, Airod variable-venturi mixer... stealth FTW Sniper tuned! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: xhxr8man and 18 guests |
