|
SVO XR6 |
|
|||
|
Hey
new injectors goin in today Do i have to use a grease or somehting when putting in the new ones? Is it "rubber grease" ? or somethin different...? and i have to undo the fuel rail, just the bolts, and then take the fuel cap out to release pressure b4 taking injectors out..?
_________________ |
|||
Top | |
nannas_ed |
|
|||
|
not sure about greasing the injectors but to release fuel presure within the lines just take out the fuel pump relay and start the car i should run for a few seconds then conk out once it cuts out crank the engine for a few mmore seconds. once all of the above have been done you wil have no pressure and fuel for that matter in the lines/rail.
hope this helps
_________________ |
|||
Top | |
EBXR8380 |
|
|||
|
Yep just undo fuel rail I use 2 stroke slid them in and put those clips over end to hold them in place...
_________________ As in ZOOM 126 edition |
|||
Top | |
SVO XR6 |
|
|||
|
cool, the injectors are in. Im just waiting for the fuel to evaporate so i dont blow up!
easy peezy, i just turned of the fuel pump tho my EMS, easier then pulling fuses :p
_________________ |
|||
Top | |
nannas_ed |
|
|||
|
SVO XR6 wrote: cool, the injectors are in. Im just waiting for the fuel to evaporate so i dont blow up!
i just turned of the fuel pump tho my EMS, easier then pulling fuses :p lol not all of us have the luxury of aftermarket engine managment
_________________ |
|||
Top | |
SVO XR6 |
|
|||
|
very very happy with them
fanks to Waggin It idles better, more responsive but i havent hit top rpm as its not tuned. Thats where it will make the big difference. makes me think that one of my other injectors was leaking or dodgy only the dyno will tell, and the fuel guage :p
_________________ |
|||
Top | |
The_Jackal |
|
|||
|
wot injectors did u get, and how much they cost?
rekon doin somthin like that to any falcon will be an inprovment?
_________________ EF XR8 - 5speed, Extractors & Exhaust |
|||
Top | |
SVO XR6 |
|
|||
|
wont make diddly squat unless you need them
generaly the std ones are good for 180rwkw(250rwhp) ish i got waggin's old 24lb injectors
_________________ |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 53 guests |