|
| dannyseb |
|
||
|
hi guys,
currently doing a engine conversion in my eb. im changing from eb engine to 96 el engine complete. ive followed the bbm instructions off fordmods but i noticed on the el engine the is one extra white round plug like the air temp sensor on the bbm. does anyone know what its for? as im stuck at the moment cause theres no wires for it on the eb loom. any help or information will be muchly appreciated. thanks Daniel
_________________ new ride: 96 EF fairmont ghia 5.slow, quad pipe exhaust, full custom eb ghia interior, el gt steering wheel, el xr front and full genuine ticky kit. and its a 5 speed manual. with sunroof, and mods to come. |
||
| Top | |
||
| TROYMAN |
|
||
|
where abouts is the sensor located..
|
||
| Top | |
||
| Pakrat |
|
||
|
My eb has a white plug to goes to no where under the log manifold, maybe the same one.
|
||
| Top | |
||
| dannyseb |
|
||
|
the plug is actually on the engine about 10-20 cms in from the flywheel.
as ive read the bbm conversion thread but its not based on engine swap. ive got the plug for the manifold sensor but wasnt sure what this one is on the block. http://i1083.photobucket.com/albums/j39 ... G_0042.jpg.
_________________ new ride: 96 EF fairmont ghia 5.slow, quad pipe exhaust, full custom eb ghia interior, el gt steering wheel, el xr front and full genuine ticky kit. and its a 5 speed manual. with sunroof, and mods to come. |
||
| Top | |
||
| TROYMAN |
|
||
|
thats the knock sensor... dont worry about it, the eb dont have the feature in its ecu..
if your using the el ecu, you can add the extra wires to hook it up if you want? but i ran my old engine without a knock sensor with no problems... |
||
| Top | |
||
| dannyseb |
|
||
|
thanks heaps troyman,
so if i put a el engine in but use my eb wiring in your opinion will that still be ok?
_________________ new ride: 96 EF fairmont ghia 5.slow, quad pipe exhaust, full custom eb ghia interior, el gt steering wheel, el xr front and full genuine ticky kit. and its a 5 speed manual. with sunroof, and mods to come. |
||
| Top | |
||
| TROYMAN |
|
||
|
dannyseb wrote: thanks heaps troyman, so if i put a el engine in but use my eb wiring in your opinion will that still be ok? yep, ive done a couple of au/el engine into ea and ed's using the ea/ed wireing and had no issues running them without knock sensors.. |
||
| Top | |
||
| dannyseb |
|
||
|
thanks heaps troyman you've made my day.
cheers Daniel
_________________ new ride: 96 EF fairmont ghia 5.slow, quad pipe exhaust, full custom eb ghia interior, el gt steering wheel, el xr front and full genuine ticky kit. and its a 5 speed manual. with sunroof, and mods to come. |
||
| Top | |
||
| dannyseb |
|
||
|
ok guys now im stuck again.
does anyone know where i can find the order of the vacuum lines for the vac solenoid? as the engine came from interstate and they cut half the wires off. ive got the vac solenoid switch and the vac hoses from a mate but unsure what order they go. as i also noticed there a green hose and a blue hose from my firewall behind the washer bottle. anyhelp would be much appreciated. thanks in advance Daniel
_________________ new ride: 96 EF fairmont ghia 5.slow, quad pipe exhaust, full custom eb ghia interior, el gt steering wheel, el xr front and full genuine ticky kit. and its a 5 speed manual. with sunroof, and mods to come. |
||
| Top | |
||
| Gab1 |
|
|||
|
dannyseb wrote: ok guys now im stuck again. does anyone know where i can find the order of the vacuum lines for the vac solenoid? as the engine came from interstate and they cut half the wires off. ive got the vac solenoid switch and the vac hoses from a mate but unsure what order they go. as i also noticed there a green hose and a blue hose from my firewall behind the washer bottle. anyhelp would be much appreciated. thanks in advance Daniel Green will go to the heater tap. Not sure where the blue one will go.....copy another car....got any mates with EL's? Gab |
|||
| Top | |
|||
| dannyseb |
|
||
|
think i worked it out thanks Gab.
another question does anyone know what pins on the vacuum solenoid go where? as im goin to run the wires to the ecu but dont know which ones go to what area? thanks Daniel
_________________ new ride: 96 EF fairmont ghia 5.slow, quad pipe exhaust, full custom eb ghia interior, el gt steering wheel, el xr front and full genuine ticky kit. and its a 5 speed manual. with sunroof, and mods to come. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 93 guests |
