|
| mitchell g |
|
||
|
hey guys, on new years eve, i noticed my el had blow a tail light, no worries i thought, went and got the loom from the ef fairmont in the padock, pluged it in and away she went all was fine and they all worked, they worked tonight when i was adjusting my head lights as low beam is sitting high and high beam is sitting low
my old man came down and had a look and we re adjusted them, then as i was going to get back in to go for a little drive down the road i noticed the same tail light had blown again, any idea what could be causing this? CHeers |
||
| Top | |
||
| StevenBruzz |
|
|||
|
Short curcuit some were along the loom
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
why change the loom???
was the globe used? it may have just been its time to blow.. otherwise could be a bad earth ........... |
||
| Top | |
||
| bry40l |
|
|||
|
{USERNAME} wrote: why change the loom??? was the globe used? it may have just been its time to blow.. otherwise could be a bad earth ........... +1 new ones arent very expensive, ive used 2nd hand globes before and theyve blown just as quick as ive changed the globe,
_________________ BF XR6 |
|||
| Top | |
|||
| mitchell g |
|
||
|
i changed the loom cause the blub just did not want to come out
|
||
| Top | |
||
| phatba |
|
||
|
possibly your putting the glibe in the wrong way round?....
|
||
| Top | |
||
| mitchell g |
|
||
|
nope, i couldn't work out how to get the bulb out so i took the loom from the ef in the paddock
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 46 guests |
