Hey guys

just converted me ef from auto to manual...

car wont start.. not even turn over.. ive tried resistor trick as described in the guide i downloaded off here..

still nuthin.. none of the gauges are workin on the dash and the kilometres arent even showing

need help real bad please and asap

please pm me
or email me at thisischeesy@hotmail.com
or txt or call me 044 729 0460

any help is muchly appreciated pleaseee

if you are getting no power what so ever, go over your fuses? espically main fuse in the engine bay if your dash or nothing is working...
ive got a converted manual ed fairmont ghia. runs on the stock auto ecu no problems what so ever. ive also got a j3 chip, highly recommended for converted cars.

mine had trouble with the loom from my EA box to the rest of the EF loom wouldnt start coz it thought it was in not in park(auto) need the auto sparky to do a quick patch to make sure it worked, i brought a a ef manual ECU but it still throws up faults with the auto BCM but i havent found it to have any effect nor bothered to find a BCM out of a manual