|
| Smithysix |
|
|||
|
I recently replaced all of the instrument globes with leds, they have been working fine up untill tonight driving along all of a sudden no tacho, speedo, fuel or oil gauges although the odometer, indicator symbols (which i replaced with the same leds) and various other lights still illuminate. Have checked the fuse, and dont think they could all blow at once, any ideas? :/
Thanks, John
_________________ Series 3 AU Falcon : Shift Kit, Herrod Motorsport 4499's, 100cpi Cat, Lukey 2.5 Catback,Ebiach Pro Kit, Monroe GT Short Struts, Usual P-plater crap,Alpine CDA-9856, Kicker speakers all round, Rear Speakers powered by a Kicker DX125 and SoundStream T5-12 powered by a Soundstream TX 1300.D |
|||
| Top | |
|||
| frankieh |
|
|||
|
put a test light on and see if they are getting power.. then pull one out and connect it to a battery and see if it works.
LED's done wrongly can be very sensitive to higher voltage.. I had a regulator fail and blew most of my leds as the alternator was feeding in more than 18 volts instead of 14. Last edited by frankieh on Sun Dec 11, 2011 5:07 pm, edited 1 time in total. |
|||
| Top | |
|||
| Futuraclassic |
|
||
|
did you smell a beuning smell at all? some of the warning lights etc should never be changed.
_________________ People hate the au series but i wouldnt have it any other way!!! |
||
| Top | |
||
| reaper_falcon |
|
||
|
I had this happen to my AU, I put in blue leds and they all of a sudden just didnt turn on. Looked like one of them had short circuitted but couldnt smell smoke or anything that would indicate this. I did notice I had to bend the wires on the bulbs outwards so they would get a better contact and stop this problem.
|
||
| Top | |
||
| JUZXR8 |
|
|||
|
When i did mine the first time around, the little wires on the base of the LED's were not sitting in the right spot, so that when I plugged them in they weren't lining up and wouldn't switch on.
Sounds silly, but it had be stumped for a while. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
