|
| bigcol81 |
|
||
|
its been 8 months since I first started this post. And I thought I would just add what has happened, for anyone that is interested.
The upgrades have been done for a couple months now and I am completely satisfied with it. I ended up going for the Trickflow Street Burner top-end rebuild kit from Summit racing. In addition, I purchased other minor upgrades from summit to refresh/improve the engine (eg water pump, oil pump, gaskets, AFR sensor & gauge, throttle body, ignition system, coil etc). Total spent with summit USD$3554 plus about USD$600 for postage, and AUD$400 for import duties. Parts purchased from Australia included new injectors, maf housing, underdrive pulley kit, harmonic balancer and quaterhorse unit. Including consumables total cost was about AUD$2K. XH5LWEPN, Scaffy and Matt from Streetbuilt Racing did a fantastic job on the install, tuning and servicing. I left my car off with them while I went on 3 weeks holidays. Came back and it was already to go! The results speak for themselves. The mainline dyno report reads: 278HP. Overall I blew my budget by $1500 on parts alone. But it was well worth it. I have to give full credit to the guys from Streetbuilt Racing. The advice was relevant, install work was quality and their service was professional. Next mods to be done: - higher ratio dif - manual conversion |
||
| Top | |
||
| TKFD |
|
||
|
{USERNAME} wrote: trickflow or afr heads are going to put me over budget. i would rather avoid buying a used intake that might be screwed when it arrives via the mail and doesnt fit. for the sake of ease, I would prefer to buy the heads and intake from summit in one hit. correct me if i am wrong, but the GT40 heads (found here: {DESCRIPTION}) are brand new aluminimum heads. they are NOT: stock GT40 cast iron heads that are fitted to the AU V8's. also, I dont want to take my car off the road for anylonger than a couple of days. pulling the intake off to get it ported is not an option for me. regarding what I am chasing, i am looking for something to give me more power all round, but propbably mostly at the lower end. take off speed for the 302 windor is sad, and I would like to improve this first and foremost. I have tried speaking with BPT, but werent interested when I called and no response to my email. All the other well known performance shops deal mostly with commowhores. Do you know any other performance guys in perth area that know a decent amount about fords? My advice - don't go to BPT! |
||
| Top | |
||
| Benny D |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: trickflow or afr heads are going to put me over budget. i would rather avoid buying a used intake that might be screwed when it arrives via the mail and doesnt fit. for the sake of ease, I would prefer to buy the heads and intake from summit in one hit. correct me if i am wrong, but the GT40 heads (found here: {DESCRIPTION}) are brand new aluminimum heads. they are NOT: stock GT40 cast iron heads that are fitted to the AU V8's. also, I dont want to take my car off the road for anylonger than a couple of days. pulling the intake off to get it ported is not an option for me. regarding what I am chasing, i am looking for something to give me more power all round, but propbably mostly at the lower end. take off speed for the 302 windor is sad, and I would like to improve this first and foremost. I have tried speaking with BPT, but werent interested when I called and no response to my email. All the other well known performance shops deal mostly with commowhores. Do you know any other performance guys in perth area that know a decent amount about fords? My advice - don't go to BPT! bit of a mine. as in last post its alredy been tuned. and BPT was good for me.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
