|
| paul0712 |
|
||
|
Does the ba icc unit requirer a code when reconnected cause the local ford dealer reconds the ba onwards doesnt need code
|
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I have the standard icc in my car and no code is required.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Might need recoding however if you put a replacement unit from another car.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Sometimes if the radio doesn't work and the word code comes up, just turn the ignition key on and off about 15 times and it will fix that but like Shaun says, if you are putting in a NEW ICC you might need to get a Ford dealer to train the BCM to the new Radio.
|
||
| Top | |
||
| vertg0 |
|
|||
|
When I upgraded the ICC in my BA XR6 from standard monochrome to colour screen, I just ensured I swapped the BEM across and no code entry was required. Worked like a charm once I turned the engine on.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 43 guests |
