|
| JakeysED |
|
|||
|
can someone tell me how to rotate the center of my turbo so i can get the oil inlet ontop and the drain on the bottom? do you just take the four bolts out and rotate it round to the next bolt holes if that makes sense? and close to top and bottom do they have to be?
 and also is an EA log intake manifold the same as an ED one? and has anyone ever got any porting/polishing done to these as i have another one sitting i was going to get painted.. cheers |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
as you said undo the bolts and rotate it around until its where u want it .
log manifold should be the same, you can get it port matched so it matches with the ports on the head
_________________ El XR6 Turbo |
|||
| Top | |
|||
| JakeysED |
|
|||
|
Cheers mate can u just loosen and spin it or do you have to pull the bolts all the way out and and rotate it round to the next bolt holes.. and also is there any benefit from getting them port matched?
Cheers |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
On a turbo I had I could loosen them as it had a spit plate holding it . Some have a big circlip .
But I'd say you'd have to take out the bolts. I guess you would have more flow .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
Please dont tell me thats a china turbo? If interested I have a full kit for sale ecu, injectors, pump, turbo, manifold, wastegate, intercooler and piping etc.
But if it is a china turbo it wont last long, I have 3 here that were given to me due to there failure. Perfect door stoppers in the shed lol
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
VS racing have some cheap Magestic 70mm turbo's for sale in U.S..
Well under $900 delivered.. 64mm will do the job also.. Being that the XR6T is 61mm... http://www.theturboforums.com/smf/spons ... y-to-ship/ They don't list them.. But have them... http://www.vsracing.net/catalog/product ... 2704a0a699
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| JakeysED |
|
|||
|
Dont stress its a garrett, are you willing to seperate your kit xr6poly?
|
|||
| Top | |
|||
| JakeysED |
|
|||
|
Dont stress its a garrett, are you willing to seperate your kit xr6poly?
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
