|
| turbowannabe |
|
||
|
G,day fellas I have a XH S pack 5 speed manual that I have been doing up gradually internally and externilly. I have lumpy cam with multi chip and tune putting 150 rwkw atm I have bought a broadband manifold with all required parts including XH XR6 auto ECU to fit so any help to do with the wiring would be awsome. I've heard I need a resister for the auto fan to get it to shut off? cheers
|
||
| Top | |
||
| razza01 |
|
||
|
G'day and welcome to the site. I did the conversion on a XG and what i did was use a EL ecu to control the fans. I'm not sure if your XH has thermo fans or not. I also used a custom J3 chip from Jason ( on this site ) to enhance my mods. There is plenty of info in the Technical Documents under Resources for you to browse through also. Good luck ,
Ray |
||
| Top | |
||
| turbowannabe |
|
||
|
Cheers for that mate that'll help me heaps cheers
|
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: G,day fellas I have a XH S pack 5 speed manual that I have been doing up gradually internally and externilly. I have lumpy cam with multi chip and tune putting 150 rwkw atm I have bought a broadband manifold with all required parts including XH XR6 auto ECU to fit so any help to do with the wiring would be awsome. I've heard I need a resister for the auto fan to get it to shut off? cheers You should get more than 150 rwkw's with a 'lumpy cam' .........?????
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
