Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

P.I.T.A HEATER PIPE REMOVAL 

 

Page 2 of 2 [ 23 posts ] Go to page Previous  1, 2

Post New Topic Post Reply  Previous topic Next topic
 
tickford861
 Post subject: Re: P.I.T.A HEATER PIPE REMOVAL
Posted: Mon Apr 02, 2012 12:07 am 
Parts Gopher
Offline

Age: 33

Posts: 76

Joined: 19th Mar 2012

Ride: EB Fairmont Ghia

Location: Radelaide , South Australia
SA, Australia
what will a new pump + pulley cost me ... ..
Top
 Profile  
 
 
ToranaGuy
 Post subject: Re: P.I.T.A HEATER PIPE REMOVAL
Posted: Mon Apr 02, 2012 1:21 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia
tickford861 wrote:
what will a new pump + pulley cost me ... ..


Pulley is usually installed on the pump, but you can get them separate. Repco part number WP3079PRP for EF thru AU OHC 6cyl iirc. I think it retails somewhere around $90-100.

Cheers

ToranaGuy

 

_________________

I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts|
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: P.I.T.A HEATER PIPE REMOVAL
Posted: Mon Apr 02, 2012 6:37 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
tickford861 wrote:
what will a new pump + pulley cost me ... ..


i recently brought a new water pump with the pulley, it was $70
Top
 Profile  
 
 
tickford861
 Post subject: Re: P.I.T.A HEATER PIPE REMOVAL
Posted: Mon Apr 02, 2012 12:49 pm 
Parts Gopher
Offline

Age: 33

Posts: 76

Joined: 19th Mar 2012

Ride: EB Fairmont Ghia

Location: Radelaide , South Australia
SA, Australia
phongus wrote:

If you go that route, get a GMB one if possible.


what is a GMB pump worth and why a GMB pump ... is there a high flow option?
Top
 Profile  
 
 
phongus
 Post subject: Re: P.I.T.A HEATER PIPE REMOVAL
Posted: Mon Apr 02, 2012 1:16 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia
tickford861 wrote:
phongus wrote:

If you go that route, get a GMB one if possible.


what is a GMB pump worth and why a GMB pump ... is there a high flow option?


It's just a brand name which I believe was the stock item Ford used. No need for a high flow system, just reliability.

http://www.ebay.com.au/itm/W3079P-GMB-W ... 1e6cb71bc1

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)
Top
 Profile  
 
 
tickford861
 Post subject: Re: P.I.T.A HEATER PIPE REMOVAL
Posted: Mon Apr 02, 2012 8:02 pm 
Parts Gopher
Offline

Age: 33

Posts: 76

Joined: 19th Mar 2012

Ride: EB Fairmont Ghia

Location: Radelaide , South Australia
SA, Australia
ok i have a new pump here ... do i put gasket goo on both sides of the gasket that i trashed last time ......
Top
 Profile  
 
 
tickford861
 Post subject: Re: P.I.T.A HEATER PIPE REMOVAL
Posted: Mon Apr 02, 2012 9:40 pm 
Parts Gopher
Offline

Age: 33

Posts: 76

Joined: 19th Mar 2012

Ride: EB Fairmont Ghia

Location: Radelaide , South Australia
SA, Australia
ie. do i apply the sealant to both sides of both gaskets?
Top
 Profile  
 
 
phongus
 Post subject: Re: P.I.T.A HEATER PIPE REMOVAL
Posted: Tue Apr 03, 2012 11:12 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia
tickford861 wrote:
ie. do i apply the sealant to both sides of both gaskets?


are you using a new pump? if so you don't need to really use it. Since you do have the sealant and a new pump, just smear a bit on both sides of the gasket for both gaskets. Also you may need to put some gasket maker on the thread of one of the bolts, because it may leak due to sticking a bit too far in...someone may correct me on that one.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 2 of 2  [ 23 posts ]  Go to page Previous  1, 2
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 61 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Nov 25, 2024 2:43 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names