Fordmods Logo

Raise exhaust 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: Raise exhaust
Posted: Tue Apr 03, 2012 4:00 pm 
Fordmods Newbie
Offline

Age: 33

Posts: 8

Joined: 16th Oct 2011

Ride: Ford EF

Location: Melboure
VIC, Australia

Hey guys, sorry if this is the wrong section too.

I've got an Ef and I've recently lowered it but my exhaust sits a bit low to the ground, is there anyway to permanently raise the exhaust muffler up so that it will further away from the ground?

Regards Tim
Top
 Profile  
 
 
 Post subject: Re: Raise exhaust
Posted: Tue Apr 03, 2012 5:25 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
Hey guys, sorry if this is the wrong section too.

I've got an Ef and I've recently lowered it but my exhaust sits a bit low to the ground, is there anyway to permanently raise the exhaust muffler up so that it will further away from the ground?

Regards Tim


Replace the rubber mount for the mid muffler. Probably old and saggy. A new one might lift it up a centimeter or so. If you want it higher you can try and use a shorter rubber, if not do the dodgy way which has been quite successful for me.

I have been using cable ties on the rubber mount for the mid muffler. Get under the car, push the muffler up to desired height and hold it there some how (a friend/piece of wood/etc). Wrap 2 or 3 cable ties around it and tighten them up until they take the weight of the muffler. Should hold it for a few years...mine has. Only replaced the cable ties because I had to get a new exhaust...that's right, the cable ties outlasted the exhaust :?.

Don't set it too high to the bottom of the chassis, the heat can transfer into the cabin and melt the sound deadening stuff or even burn it.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: Raise exhaust
Posted: Tue Apr 03, 2012 5:47 pm 
Getting Side Ways
Offline
User avatar

Age: 31

Posts: 422

Joined: 10th Jul 2009

Gallery: 7 images

Ride: Black EB 5 Speed EL Front End

Location: Bundaberg
QLD, Australia

you can use a hose clamp around the rubber also

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Raise exhaust
Posted: Tue Apr 03, 2012 5:55 pm 
Smokin em up
Offline
User avatar

Age: 32

Posts: 243

Joined: 4th Jun 2011

Gallery: 6 images

Ride: ef xr6

Location: melbourne
VIC, Australia

hose clamp is your best bet dude

 

_________________

EF XR6
K&N PANEL FILTER ulah, CAM, J3 CHIP, 128.3 RWKW, F6 TYPHOON RIMS, FULL TAN AND BLACK INTERIOR, CUSTOM BOOT INSTALL IN PROGRESS..
:)

Top
 Profile  
 
 
 Post subject: Re: Raise exhaust
Posted: Tue Apr 03, 2012 11:57 pm 
Fordmods Newbie
Offline

Age: 33

Posts: 8

Joined: 16th Oct 2011

Ride: Ford EF

Location: Melboure
VIC, Australia

Cheers thanks guys
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 11:51 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names