|
| Michael (HYPOEB) |
|
||
|
TKO is the way to go mate;)
_________________ EBT-747 - |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
{USERNAME} wrote: TKO is the way to go mate;) How did you go fitting yours ? Did you have to panel beat the trans tunnel or cut it for shifter? And did you buy it as a complete kit from mal wood ? Cheers
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Michael (HYPOEB) |
|
||
|
Had to cut about 20mm - 40mm to get the shifter to pop through. No panel beating in the trans tunnel was needed. I also modified the t5 crossmember to fit the tko. My kit cost me about 5k all up. I bought the box,Bellhousing and tail sharft second hand for about $3000. Clutch was around $2000 (You wont need one of these clutches most likely though) and i bought a shifter link kit from Mal Wood that bought the shifter back to the original position. I think that was around the $150 mark.
_________________ EBT-747 - |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Cheers , the tko 600 is on eBay for $3000 from Sydney . I could just use my t5 bellhousinh and the the adaptor plate made up to reduce the length of the input shaft . If I went tko 500 I can keep my 10 spline clutch , you have the tko 600 which has the 26 spline input shaft ? . I'll be looking into one in the future . They seem like a easy conversion .
Im guessing yours is the ford version ? Whats the difference between ford and gm versions ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: Cheers , the tko 600 is on eBay for $3000 from Sydney . I could just use my t5 bellhousinh and the the adaptor plate made up to reduce the length of the input shaft . If I went tko 500 I can keep my 10 spline clutch , you have the tko 600 which has the 26 spline input shaft ? . I'll be looking into one in the future . They seem like a easy conversion . Im guessing yours is the ford version ? Whats the difference between ford and gm versions ? something to keep in mind, the tko 500 comes in 10 spline and 26 spline input shafts, they also come in a few diffetent ratio's.. im also in the process of looking at a tko500... |
||
| Top | |
||
| Michael (HYPOEB) |
|
||
|
Yeh thats right mate,You can keep your clutch with the tko500. realy couldnt tell you the difference between the ford and gm one
_________________ EBT-747 - |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Thanks . The tko is what I'll be getting .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| JakeysED |
|
|||
|
good to hear i can keep my same clutch with the 500 as i am currently looking for one to suit the t5 for now till i upgrade later when its on the road.. wheres the best place to get injectors from and how big do i go?
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
U can get 42 lb or 60 lb from eBay . $250-$300.
Is the tko hydraulic clutch or cable ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: Is the tko hydraulic clutch or cable ? to fit a tko you can buy a spacer/addapter plate from malwood to join the tko to the factory bellhousing so you can use your std clutch and clutch cable.. although there still is the option of the malwood hydraulic conversion.. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
I'd keep the cable, can a 26 spline clutch be used with cable ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| JakeysED |
|
|||
|
Thanks mate, so to fit a tko 500 all you need is the box, spacer plate and modded crossmember? Is that all? What bout tailshaft?
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
Your tail shaft will fit
_________________ El XR6 Turbo |
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: I'd keep the cable, can a 26 spline clutch be used with cable ? yes, but you then need to find a clutch to suit the 26 spline input..or go with a xr6t flywheel and clutch. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: I'd keep the cable, can a 26 spline clutch be used with cable ? yes, but you then need to find a clutch to suit the 26 spline input..or go with a xr6t flywheel and clutch. That's good , can't seem to find many tko 500, plenty of tko 600
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
