|
| Landau510 |
|
||
|
So im just wondering why is there water going into the EGR spacer on the 5L?. Ive just put fancy ford racing spacer on the DL to match the 65mm TB and it has the inlet/oulet on oposite sides as oposed to the standard one. What does the water do?...cool it? I would have thought it would pretty damn hot water going in and wouldnt do much for cooling at all.
And if it doesnt do much is it absolutely necessary?...can it just be blocked at the manifold?
_________________ Lets just pretend I give a s**t and leave it at that..... |
||
| Top | |
||
| Benno The Viking |
|
||
|
Warm the air up for cold weather starts, perhaps?
_________________ Build Thread |
||
| Top | |
||
| Landau510 |
|
||
|
Yeah thats the best thought I could come up with...but im in Queensland so not so sure how much that would be needed.....kinda doesnt make sense to put a cold air intake on just to heat it up.
_________________ Lets just pretend I give a s**t and leave it at that..... |
||
| Top | |
||
| NLGHIA5.0 |
|
||
|
Its for the Yanks who live in cold climates, i'd assume to stop the throttle body from icing up?
We don't really have any need for it here. |
||
| Top | |
||
| Benno The Viking |
|
||
|
A few old engines we have here are like that, some with even the exhaust gasses warming it I think? But yeah, not really needed in Qld.
_________________ Build Thread |
||
| Top | |
||
| Nigel |
|
||
|
Nope - that water is Cooling Water - Seriously!.
On pre-Au's and some explorer manifolds EGR is run up through to the "Spacer" (which is your EGR housing). Exhaust Gas is hot. So Water is used to stop it getting too hot - affecting your engines performance and efficiency. Thank god it was deleted on the AU. You cant just block them off either - well you can, but it will still get hot up there (EGR) until you block the EGR off properly (Im not sure how this is best done - perhaps at the heads, or the lower manifold?) Nigel |
||
| Top | |
||
| Landau510 |
|
||
|
Cheers guys thanks for that
_________________ Lets just pretend I give a s**t and leave it at that..... |
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: Nope - that water is Cooling Water - Seriously!. On pre-Au's and some explorer manifolds EGR is run up through to the "Spacer" (which is your EGR housing). Exhaust Gas is hot. So Water is used to stop it getting too hot - affecting your engines performance and efficiency. Thank god it was deleted on the AU. You cant just block them off either - well you can, but it will still get hot up there (EGR) until you block the EGR off properly (Im not sure how this is best done - perhaps at the heads, or the lower manifold?) Nigel Zigactly! |
||
| Top | |
||
| V8 Ghia Mike |
|
||
|
I had my EGR off over the weekend and see the point, but there isn't any exhaust gas being directed through it is there? I can only imagine engine heat soak getting the EGR spacer hot. Would the coolant be much cooler than that? As for cold starts, the coolant is cold too...
Mike
_________________ EF Ghia 5.0 - XR8 in a tuxedo....classy, low and loud |
||
| Top | |
||
| Nigel |
|
||
|
Exhaust Temps are in the 00's of degrees. Engine coolant is 80 or 90 odd. Intake temps need to be as cold as they can be.
If the EGR is open, and gas is flowing then you'll be getting direct (very hot) Gas up there - and the temps will rise very quickly without cooling. It may seem irrelevant, but more heat = less performance and/or efficiency Nigel |
||
| Top | |
||
| Landau510 |
|
||
|
I think it also depends on the manifold as well doesnt it?....im pretty sure the explorer one that I put on didnt have the whole from the lower to the uper (could be wrong there)
_________________ Lets just pretend I give a s**t and leave it at that..... |
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: I think it also depends on the manifold as well doesnt it?....im pretty sure the explorer one that I put on didnt have the whole from the lower to the uper (could be wrong there) Yep that's right. Explorers had external EGR like trucks and then, when used in Oz, no EGR at all. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |