|
| Lukeee |
|
|||
|
Hey guys,
Really Noob question but where is the filler hole located on my diff? I'm guessing it's the bolt that the "high performance" tag is attached to but just want to confirm... Cheers, Luke
_________________ Weekender: 07 BFII XR6T - Conquer |
|||
| Top | |
|||
| Troy |
|
||
|
lukeee wrote: Hey guys, Really Noob question but where is the filler hole located on my diff? I'm guessing it's the bolt that the "high performance" tag is attached to but just want to confirm... Cheers, Luke you guessed right |
||
| Top | |
||
| Lukeee |
|
|||
|
Troy wrote: lukeee wrote: Hey guys, Really Noob question but where is the filler hole located on my diff? I'm guessing it's the bolt that the "high performance" tag is attached to but just want to confirm... Cheers, Luke you guessed right Cheers for the quick reply mate! First time doing so just wanted to confirm  Cheers, Luke
_________________ Weekender: 07 BFII XR6T - Conquer |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I didn't fill mine from the bolt with the tag , the hole is like 10 mm . There should be a big plug on the housing . Unless my diff isn't the same ??
_________________ El XR6 Turbo |
|||
| Top | |
|||
| evxr6 |
|
|||
|
You've probably already finished, but it's an 1 1/8" socket to undo it.
_________________ Current ride: MY03 Liberty RX Wagon |
|||
| Top | |
|||
| Lukeee |
|
|||
|
evxr6 wrote: You've probably already finished, but it's an 1 1/8" socket to undo it. I WISH!!!! Failed so badly lol, couldn't undo the bolt it was done up so hard  Smashed my pinky too so I cracked the s**t and gave up  (also didn't want to round the bolt) 1 1/8" is about 30mm isn't it? Don't have one, was trying to use a spanner haha! I Will hopefully pick one up next weekend! Will take my grandfathers ramps home tonight, hate using a trolley jack while being under the car! What makes it more frustrating is that it's actually really straight forward, it's just these bloody stupid bolts that never come undone  Thanks for the advice guys!
_________________ Weekender: 07 BFII XR6T - Conquer |
|||
| Top | |
|||
| evxr6 |
|
|||
|
lukeee wrote: evxr6 wrote: You've probably already finished, but it's an 1 1/8" socket to undo it. 1 1/8" is about 30mm isn't it? Don't have one, was trying to use a spanner haha! Close. It's 28.575. Which is miles out when talking about spanner sizes
_________________ Current ride: MY03 Liberty RX Wagon |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I use a 15" shifter . Flog it with a hammer it will come loose , make sure the jaws are firm and tight on the plug .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| snap0964 |
|
|||
|
A good fitting socket, breaker bar, a piece of pipe or jack handle to give you some added torsion.
Should be no probs in undoing.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Lukeee |
|
|||
|
snap0964 wrote: A good fitting socket, breaker bar, a piece of pipe or jack handle to give you some added torsion. Should be no probs in undoing. What's a good size breaker bar you'd recommend? Only have a few shorter ones here at home so will pick up a longer one next weekend along with appropriate socket and give it another shot!
_________________ Weekender: 07 BFII XR6T - Conquer |
|||
| Top | |
|||
| evxr6 |
|
|||
|
snap0964 wrote: A good fitting socket, breaker bar, a piece of pipe or jack handle to give you some added torsion. Should be no probs in undoing. Oh yeah! Way better than a "nut-f**k".
_________________ Current ride: MY03 Liberty RX Wagon |
|||
| Top | |
|||
| evxr6 |
|
|||
|
lukeee wrote: snap0964 wrote: A good fitting socket, breaker bar, a piece of pipe or jack handle to give you some added torsion. Should be no probs in undoing. What's a good size breaker bar you'd recommend? Only have a few shorter ones here at home so will pick up a longer one next weekend along with appropriate socket and give it another shot! Just the stock standard 400mm one should do it combined with a bit hanging off it.
_________________ Current ride: MY03 Liberty RX Wagon |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Yeah, that's all you should need.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 0 guests |
