Fordmods Logo

Fried Clutch EL xr6 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: Fried Clutch EL xr6
Posted: Fri Apr 27, 2012 11:37 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

hi guys
looking to see what people are running and info on some clutches.
as mine is now fried to s**t. i can still drive but at a snails pace anything more then 5 degrees of throttle and it starts to slip.

not knowing what is in my xr6 now but it is f**k heavy, (heavier then my hino truck at work)
my fire wall has cracked but fiends s/s plate has fixed that.

is there a way to identifiy what is in my car with out completely removing it.
and what are some good options as a replacement .

been looking at a "exedy heavy duty kit" which is 40% heavier then standard.
Top
 Profile  
 
 
 Post subject: Re: Fried Clutch EL xr6
Posted: Fri Apr 27, 2012 11:49 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

Excedy heavy duty are good, aparently they arent heavier on the foot but are a much better clutch over the standard

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Fried Clutch EL xr6
Posted: Sat Apr 28, 2012 12:00 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

Jonathan Kakousidis wrote:
hi guys
looking to see what people are running and info on some clutches.
as mine is now fried to s**t. i can still drive but at a snails pace anything more then 5 degrees of throttle and it starts to slip.

not knowing what is in my xr6 now but it is f**k heavy, (heavier then my hino truck at work)
my fire wall has cracked but fiends s/s plate has fixed that.

is there a way to identifiy what is in my car with out completely removing it.
and what are some good options as a replacement .

been looking at a "exedy heavy duty kit" which is 40% heavier then standard.


Unfortunately, no way of really knowing what clutch kit you have on until the box is completely out. Unless you have better than x-ray vision to see through the bell housing.

I have an Xtreme Performance clutch which was supposed to be heavier than stock, I think it was also 40% heavier.

However, I found after installing it, it was much lighter than the stock. So I was surprised and happy at the same time :). Drives fine and haven't had issues since. Bought mine from Hightek Brakes for $365 about 5 years ago now...so might be way different now.

I was told, if the fingers on the clutch housing are bent unevenly, it can cause the clutch pedal to be heavier to push on. Not sure if that's true or not, but having had a look at my old one closely, they were pretty badly bent. If not, it might also be sticky cable, look for any kinks and might need lubing.

Hope that helps.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: Fried Clutch EL xr6
Posted: Sat Apr 28, 2012 12:09 am 
Parts Gopher
Offline

Age: 32

Posts: 76

Joined: 2nd Jul 2010

Ride: 96 EF 5 Spd

Location: lara
VIC, Australia

yeah after i replaced my clutch it was wayyyyyy lighter, i think it just gets heavier as the thrust bearing and pivot point on the clutch fork get dirtier
Top
 Profile  
 
 
 Post subject: Re: Fried Clutch EL xr6
Posted: Sun Apr 29, 2012 2:51 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

cheers guys for the info.

is there any brands that you's recomend that i stay away from? or any issues with any brands that people have had.
Top
 Profile  
 
 
 Post subject: Re: Fried Clutch EL xr6
Posted: Sun Apr 29, 2012 2:55 pm 
Getting Side Ways
Offline

Age: 29

Posts: 3344

Joined: 19th Dec 2008

Gallery: 1 images

Ride: el fairmont ghia

Location: Farleigh
QLD, Australia

i've got an excedy hd " sports tough" clutch in my el, it feels fine under foot, almost as light as a standard 3 bolt clutch which is much smaller, even my mum can drive my car with my clutch in it, and she doesn't struggle is a very nice clutch to drive with

 

_________________

Muts EL Fairmont Ghia
Image
did someone call 9 1 HOLY s**t?

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 160 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 16, 2024 8:48 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names