|
| Leszek |
|
|||
|
Have forgotten how to turn on the EF - Instrument Diagnostics
atm the doco on this isnt up yet in the modifications document
_________________
|
|||
| Top | |
|||
| efracer |
|
|||
|
Turn key to Acc, hold odo reset button in for a good 10 seconds a few mor to be sure, keep holding it in as u turn the key to On (dont start engine) and then press odo reset button 3 times, on the 3rd press hold it in for a few more seconds then when u release it will go into diagnostic mode.
Hope i havn't screwed that up i did it this mornin. 
Jared
_________________ Team Argon Silver - EF Series 2 Futura
|
|||
| Top | |
|||
| Leszek |
|
|||
|
thanks
just wondering does it return to normal when the car is turned off?
_________________
|
|||
| Top | |
|||
| efracer |
|
|||
|
no you have to hold the odo button for a fair while and then when u release it will go to normal, either that or just wait half an hour or so then it changes bak itself.
_________________ Team Argon Silver - EF Series 2 Futura
|
|||
| Top | |
|||
| rockerfella |
|
||
|
how do the diagnostics work?
_________________ \m/ |
||
| Top | |
||
| twirqurky |
|
||
|
They just give us more info on the car. engine temp, battery charge, digital speedo etc etc
|
||
| Top | |
||
| Rapier |
|
||
|
i like the speedo mode but it has a habbit of resetting, had to use it alot when i was changing my headlight bulbs around took old ones out then took ages to do new ones, infact never got round to finish em before i put a new cluster in
|
||
| Top | |
||
| 1 SLY 97EL |
|
|||
|
efracer wrote: Turn key to Acc, hold odo reset button in for a good 10 seconds a few mor to be sure, keep holding it in as u turn the key to On (dont start engine) and then press odo reset button 3 times, on the 3rd press hold it in for a few more seconds then when u release it will go into diagnostic mode.
Hope i havn't screwed that up i did it this mornin. Jared Actually after you have held the Odo button in for 10 seconds. Then you press the Odo button 3 times quickly and on the third press hold the Odo button in until the" Seat belt" sign on the dash goes off. Then a short time later the odo screen will go blank then the "Ford " sign will flash then after that you just keep pressing the Odo butten until you see a reading that fancies you.
_________________ " In life their is never an Obligation just an Opportunity to..Own an awesome 1970 Ford Mach 1 Mustang! " |
|||
| Top | |
|||
| twirqurky |
|
||
|
Quote: i like the speedo mode but it has a habbit of resetting, had to use it alot when i was changing my headlight bulbs around took old ones out then took ages to do new ones, infact never got round to finish em before i put a new cluster in n
i think i figured something out here. the longer it flashes ford ford ford on the diagnostic start up the longer it should stazy on digital speedo/RPM mode. also what type of car you got rapier and is your digital speedo give you a different reading to your analouge speedo? how much mucking around is involved with the diagnostics when putting a new cluster in? |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 46 guests |
