|
| FORD-FALCON-EL |
|
||
|
Hi Guys,
I just brought a Falcon EL 97 and I picked up the wrong wiper stalk it has the wiper delay adjuster on it were as the Falcon does not have this. Will it still work fully or is the a mod for this and is it easy I need to know as i am getting this car through roadworthy. |
||
| Top | |
||
| Esteven8 |
|
|||
|
For the variable delay you will need a mid series (Futura, XR) BCM* and you will need to add the wiring from the stalk to the BCM and I believe to the wiper motor as well. Bit of a PITA job... largely why I haven't finished mine.
But the wipers WILL work as normal without modification in regards to intermittent wipe etc, you just won't have the variable speed functionality. Doubt that is an issue for roadworthy inspections. *Body Control Module, looks after central locking, smartlock, interior controls etc.
_________________ {USERNAME} wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. {DESCRIPTION} {DESCRIPTION} |
|||
| Top | |
|||
| FORD-FALCON-EL |
|
||
|
{USERNAME} wrote: For the variable delay you will need a mid series (Futura, XR) BCM* and you will need to add the wiring from the stalk to the BCM and I believe to the wiper motor as well. Bit of a PITA job... largely why I haven't finished mine. But the wipers WILL work as normal without modification in regards to intermittent wipe etc, you just won't have the variable speed functionality. Doubt that is an issue for roadworthy inspections. *Body Control Module, looks after central locking, smartlock, interior controls etc. Ok will have to go out and get the standard stalk then to much stuffing around for that. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 43 guests |
