|
| yobboford |
|
|||
|
Great work!!!! That looks fantastic.
Out of intrest, how have you found the electric water pump so far? What brand and how much was it if you dont mind me asking?
_________________ Thanks to Crescent Motors, Liverpool. |
|||
| Top | |
|||
| XKNO1 |
|
||
|
{USERNAME} wrote: Great work!!!! That looks fantastic. Out of intrest, how have you found the electric water pump so far? What brand and how much was it if you dont mind me asking? Gday yobboford and thanks. Its a Davis Craig water pump Ive ran in this car for about 4 years when it was the old 250 2V with tripple SU,s. It was bored out 60 thou so the walls were pretty thin and I only had a small thermo fan. I live in Rockhampton were it gets up around the 40 mark in summer and the only time she would get hot would be when stuck in traffic so it was probably fan not pump. my pump was the smallest one they made then now you can get a bigger one and as for price im not sure now i think around the $300 mark. |
||
| Top | |
||
| yobboford |
|
|||
|
Awesome, I have always wondered how well the Davis Craig ones worked, did you use an old water pump housing with the impeller and shaft removed and sealed up?
_________________ Thanks to Crescent Motors, Liverpool. |
|||
| Top | |
|||
| XKNO1 |
|
||
|
Gday mate. If you look closely in the bottom photo you can see i made the blower snout support bolt were the old water pump used to be and have a hole through it with a water neck of the head.it gives me a little bit more clearance.
{USERNAME} wrote: Awesome, I have always wondered how well the Davis Craig ones worked, did you use an old water pump housing with the impeller and shaft removed and sealed up?
|
||
| Top | |
||
| XKNO1 |
|
||
|
Got the exaust hooked up and msd unit on and tuned it the best i can now i just have to save and get it to a dyno so ill keep you posted. It sounds a bit diferent now with exaust on.
http://s185.photobucket.com/albums/x180 ... V01489.mp4 |
||
| Top | |
||
| XKNO1 |
|
||
|
Well ive done a few 100ks so far just running her in slowly,heres a little vid.http://www.youtube.com/watch?v=PJUrQRzQeF4
|
||
| Top | |
||
| tyler06 |
|
||
|
Good work as per usual mate!!
|
||
| Top | |
||
| Mark_XDF |
|
|||
|
very nice XK mate, nice setup too
_________________ CHEERS MARK |
|||
| Top | |
|||
| DA22LE |
|
|||
|
Who doesn't love supercharger whine????
Not a big fan of the bonnet scoop, but other than that, bloody brilliant work. Engine bay looks fantastic.....just like mine...lol..... Well done!!! Daz
_________________ BA XR8 Boss 260 |
|||
| Top | |
|||
| badcooky |
|
||
|
Very very noice.
_________________ BA XL ute. |
||
| Top | |
||
| XKNO1 |
|
||
|
Got her to the dyno and without intercooler(wasnt making any differance at 7psi Ill need to make a water tank)and 7psi of boost she made-
     not bad for the old girl,Ill need to sort intercooling and beef up rear end then look at winding up boost  It seems louder without intercooler and Ill need to plumb back valve to help with noise.
|
||
| Top | |
||
| XKNO1 |
|
||
|
Time for some fun...
 http://s185.photobucket.com/albums/x180 ... t=car3.mp4
|
||
| Top | |
||
| Fordpwr |
|
|||
|
Looks and sounds great mate!!
_________________ 2006 BF XR8 VORTECH @ 6psi w/m injec 350rkws |
|||
| Top | |
|||
| frankieh |
|
|||
|
Where is the +1/like button when you need it.
 I like where you've got the charger.. much easier when you have the exhaust and intake on the other side. Very tidy. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
