Hi Guys

I think my ISC is faulty but i wanted to make sure first. firstly I have removed the module and connected it to a 12V power supply. i can hear the soliniod work but i see no move ment in the shaft inside. How much movement should that shaft make in side the unit?

secondly i read some where that with a ohm meter accoss the terminals should 9.6 kilo ohm i get 9.6 ohm. can some back up 9.6 kilo ohm or is it ment to be 9.6 ohm?

this is not a cleanliness issue or a fillter issue but any advise would be great?

thanks guys