|
StevenBruzz |
|
|||
|
i have had a on going problem with my ford EL gearbox now before i go spending money on a service ( wich i did a pan service when first bought) i was wondering if using the OBD would help solve the issue with my gearbox sliping, i know ot wont say add 123.45ML of fluid but it may tell me if a soilinoid is faulty wich is what im thinking (s5 to be exact) as it slips the gears and sometimes locks and spins the wheels going thru gear changes but its ok when the box is cool only at operating temps does it do it
any postive ideas would be greatly appricated |
|||
Top | |
efxr6wagon |
|
||
|
The trans on my EF has slipped twice on me - both times it was low fluid level and fixed with a 500ml top-up.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
Top | |
StevenBruzz |
|
|||
|
{USERNAME} wrote: The trans on my EF has slipped twice on me - both times it was low fluid level and fixed with a 500ml top-up. i added more fluid and it helped delay it but still after a while it (5 mins longer) had started started slipping again please note its only at operating temps and the engine doesnt get too hot on the gauge |
|||
Top | |
Bibby_77 |
|
||
|
i had the same problem on my 97 el gli, i had it serviced, but to no avail.... i just ebayed a good second hand tranny. also while ya there it maybe a idea if you do so choose to change out ya tranny do the rear mains. wont cost much more. i had it done for $40 bucks extra.
|
||
Top | |
StevenBruzz |
|
|||
|
you would of had the engine out to tho didnt you?
if i do it il be leaving it in and dropping the box out |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 42 guests |