hi

last time i hooked up a battery to the ed fairmont i tried the climate control and it just stays on the feet setting,

also the trip computer doesnt work or light up does anyone know why

currently it has ed body wiring ed engine bay wiring and eb2 ghia dash wiring and a ed cfc free climate panel, had to solder a plug for the fan speed resistor??? (cut that plug off old harness and solder it on as plug was diffrent but both had same colour wires if it helps

and there may be a fuse or 2 missing but the climate control had a fuse in at the moment

also a vacuum line isnt yet hooked up to the engine manifold or map sensor yet

does the engine have to be running to be able to swap from feet to face to demister

all flaps and diverters\flaps are vacuum controled with motor running.

will a eb2 ghia dash harness work with ed body and engine bay wiring and ed cfc free cc module

trip computer doesnt light up and climate control doesnt work properly

also the fan is slow or was last time the climate control was turned on

DOWN LOAD the manuals-http://www.fordmods.com/viewtopic.php?f=38&t=113232
i think the manuals have the wiring and colour codes,you soldered a plug up,check the wiring colours.the down load is slow.

"fairmont 1" stop posting everything in the 6 cyl forum!
if its not related to the 6 cyl engine dont post it here..

electrical questions belong in the auto electrical forum..


THREAD MOVED

Which bit is urgent?

everything this guy posts appears to be urgent..
so urgent for a car that doesnt even run..