Fordmods Logo

Roof linning 

 

Page 1 of 1 [ 13 posts ] 

 
 Post subject: Roof linning
Posted: Sat Apr 28, 2012 7:58 pm 
Getting Side Ways
Offline

Age: 34

Posts: 1109

Joined: 18th Oct 2006

Location: Adelaide
SA, Australia

hey have gotten bored and removed my roof linning

only did it because it was sagging like no tommorow so im thinking of removing the lose foam pieces and re gluing it back together im guessing 1/8th at a time

i managed to remove the linning with out damaging it to much so its all re useable i believe


so i was curious what glue to use id really like to use silcone but its such a thin "carpet" that it would seep through

thank you in advance everyone i should have really made a how to tutortial but being in a wheel chair n crutches was a real pain in the a$$ to :(
Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sat Apr 28, 2012 8:01 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 591

Joined: 28th May 2011

Gallery: 4 images

Ride: EF Futura DUH

Location: central coast
NSW, Australia

You really need new material. as it is backed by foam aswell.
Use spray on contact adhesive. You need to spray it on and allow it to dry a tad to get tacky.
Then roll on.

Is alot harder than it seems. Takes some skill to do it well.

 

_________________

1996 EF Futura factory manual
Fully rebuilt engine,Decked, Honed, Bored, Tolerences spot on, Wade 1673, Extractors, 2.5" zorst, 3" CAI, High flow filter, Exedy sports tuff clutch, Chiptorque tune.
Future Mods: A mortgage...

Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sat Apr 28, 2012 8:03 pm 
Getting Side Ways
Offline

Age: 34

Posts: 1109

Joined: 18th Oct 2006

Location: Adelaide
SA, Australia

ok but i was thinking of re using the exsisting material if i cleaned it up it just seems to fluff of the foam which backs it
Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sat Apr 28, 2012 8:05 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 591

Joined: 28th May 2011

Gallery: 4 images

Ride: EF Futura DUH

Location: central coast
NSW, Australia

It will be a vast improvement regardless.
I would def look at getting some new material though.
Most trimmers have it.

 

_________________

1996 EF Futura factory manual
Fully rebuilt engine,Decked, Honed, Bored, Tolerences spot on, Wade 1673, Extractors, 2.5" zorst, 3" CAI, High flow filter, Exedy sports tuff clutch, Chiptorque tune.
Future Mods: A mortgage...

Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sat Apr 28, 2012 8:07 pm 
Getting Side Ways
Offline

Age: 34

Posts: 1109

Joined: 18th Oct 2006

Location: Adelaide
SA, Australia

ok my step dad i dont trust him but he has done a course in upholstery

but we are in an argument over the glue i really would rather use something thicker like roof n gutter silcone but he is saying like you to use kwik grip is that the stuff ?
Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sat Apr 28, 2012 8:21 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 591

Joined: 28th May 2011

Gallery: 4 images

Ride: EF Futura DUH

Location: central coast
NSW, Australia

Silicone? No.
Quick Grip? Yes.

Unfortunately he is right. :lol:

 

_________________

1996 EF Futura factory manual
Fully rebuilt engine,Decked, Honed, Bored, Tolerences spot on, Wade 1673, Extractors, 2.5" zorst, 3" CAI, High flow filter, Exedy sports tuff clutch, Chiptorque tune.
Future Mods: A mortgage...

Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sat Apr 28, 2012 8:22 pm 
Getting Side Ways
Offline

Age: 34

Posts: 1109

Joined: 18th Oct 2006

Location: Adelaide
SA, Australia

dam it hes right lol

ok time to tommorow remove n clean all the old foam

its only an EA sure its well kept etc but i may as well do it half propley im sure my way of cleaning the foam and quick grip will beat the thumb tack trick ?
Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sat Apr 28, 2012 11:10 pm 
Getting Side Ways
Offline

Age: 34

Posts: 1109

Joined: 18th Oct 2006

Location: Adelaide
SA, Australia

also do i NEED new foaming ?
Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sun Apr 29, 2012 12:51 am 
Getting Side Ways
Offline

Age: 73

Posts: 2542

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia

{USERNAME} wrote:
also do i NEED new foaming ?

backing foam breaks down after 11-12 years,clean all the dead foam off the card board and buy a new bit from the trimmers,2 cans of spray contact from super cheap.i had to do mine in the ltd,cappa cloth-so i used any colour first and then glued the cappa to it,twice the work and a pita,as it has to line up every where,no streching or shrinking,in 1 go.

 

_________________

R.I.P HANS HARTMAN

Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Mon Apr 30, 2012 6:39 pm 
Getting Side Ways
Offline

Age: 34

Posts: 1109

Joined: 18th Oct 2006

Location: Adelaide
SA, Australia

ok have re used my material and removed the dead foam

now half of it came beautful but i didnt use as much glue the other half i got p****d of at well 1/4 and used twice the amount of glue and it seeped through now if it drys clear il be all happy

what kind of spray adhesive did you use hans
Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Mon Apr 30, 2012 10:14 pm 
Getting Side Ways
Offline

Age: 73

Posts: 2542

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia

{USERNAME} wrote:
ok have re used my material and removed the dead foam

now half of it came beautful but i didnt use as much glue the other half i got p****d of at well 1/4 and used twice the amount of glue and it seeped through now if it drys clear il be all happy

what kind of spray adhesive did you use hans

super cheap spray contact glue for upholstry,trick is to spray both and wait till its tacky,then press together.run your hand over it with firm pressure to flatten it and remove air pockets and wrinkles,ive lost count,done 6-9 of them so far,ford,holden,jap cars.work from one end and 2ft-60cm at a time the glue dries quick

 

_________________

R.I.P HANS HARTMAN

Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Sun May 13, 2012 12:34 am 
Getting Side Ways
Offline

Age: 34

Posts: 1109

Joined: 18th Oct 2006

Location: Adelaide
SA, Australia

{USERNAME} wrote:
{USERNAME} wrote:
ok have re used my material and removed the dead foam

now half of it came beautful but i didnt use as much glue the other half i got p****d of at well 1/4 and used twice the amount of glue and it seeped through now if it drys clear il be all happy

what kind of spray adhesive did you use hans

super cheap spray contact glue for upholstry,trick is to spray both and wait till its tacky,then press together.run your hand over it with firm pressure to flatten it and remove air pockets and wrinkles,ive lost count,done 6-9 of them so far,ford,holden,jap cars.work from one end and 2ft-60cm at a time the glue dries quick




Did pretty much that one side not enough glue the other side a bit to much the last 40cm it seeped through i guess to much is better as it will stick


thank you so much i should have taken pictures was quite simple really simple
Top
 Profile  
 
 
 Post subject: Re: Roof linning
Posted: Fri Jun 08, 2012 11:48 pm 
Fordmods Newbie
Offline

Age: 32

Posts: 19

Joined: 3rd Mar 2012

Gallery: 2 images

Ride: el futura

Location: sydney
NSW, Australia

hey just a quick suggestion why dont u just go to a trimmer place spend 250-200 get it done correct nice and neat and if anything becomes wrong with it then they fix it for free

 

_________________

WHY DO OLD PEOPLE SPOIL YOUNG PEOPLES FUN, ITS NOT LIKE THEY HAVE NEVER SMOKED UP TYRES BEFORE

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 13 posts ] 

Who is online

Users browsing this forum: Majestic-12 [Bot] and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 24, 2024 1:40 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names