hey guys currently building an eb xr6 engine. while putting together my lovely assistant (also my fiance) spilt the old oil on my notes. which then became unreadable i remember most stuff but need to know which way pistons go in. so simply looking from the front of engine which side is the recess for the valve on. logic dictates on the right as writing on crank big ends and pistons would all be readable from the one direction then. but dont want to stuff it with logic.

also on a side note want to put an eb head on an au ute. is it simply bolt it on or do i use au rocker gear and cam or use eb gear.

thanks in advance guys little bit nervous bout the situation

The au has a temp sender port on the rear of the head . The el hybrid motors had the same