|
| XSeries |
|
||
|
Am looking at an EA II series car with the 4 speed BTR auto but the box may be shot. Just wondering what autos are direct bolt ons for a swap? Do the autos from the EB, ED, EF and EL bolt straight in and are there any wiring differences?
|
||
| Top | |
||
| TROYMAN |
|
||
|
you can directly fit 4 speed auto's from ea2 -au.. only differences are torque converters and late ef onwardss dont have a dip stick..
if you use a box from el -au best to use the el-au torque converter as there are some differences in the oil pump in the box, otherwise there the same... |
||
| Top | |
||
| Esteven8 |
|
|||
|
{USERNAME} wrote: if you use a box from el -au best to use the el-au torque converter as there are some differences in the oil pump in the box, Further to Troyman's post. The EA-D torque converters actually have a different throat size to the EF-AU ones and as such will not physically fit onto an EF-AU trans and vice-verse. I found this out the hard way! 
_________________ {USERNAME} wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. {DESCRIPTION} {DESCRIPTION} |
|||
| Top | |
|||
| XSeries |
|
||
|
Ok thanks for that...yes forgot about the dip stick issue..can't believe Ford removed the trans dip stick on the EF and later...WTF!!! Sounds like a good EB/ED auto is the way to go....
|
||
| Top | |
||
| NCIIGHIA |
|
||
|
i own an nc lane with a au box in it. i suggest that as an option. the au box is smoother and stalls higher. although i heard earlier boxs are stronger.
_________________ If life was easy we would all be living |
||
| Top | |
||
| fiend |
|
|||
|
Isn't the shifter in a different position on AU's? Further back in cabin?!
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: Isn't the shifter in a different position on AU's? Further back in cabin?! yes, but the auto au just has a linger shift rod, box is still same length as e series.. |
||
| Top | |
||
| fiend |
|
|||
|
Yeah, I knew box was same length. But the shifter bits are a few inches further back on AU. So that would require some level of pissing about?
Ah well, whatever. I might find out. Could try an AU box into the ED this weekend. But then again, EF would be better. Dipstick and all that. Plus any AU that is being wrecked in NZ has probably been a taxi...... |
|||
| Top | |
|||
| MAD |
|
|||
|
No changes on the auto shifter bits. Only the interior shifter bits for the AU.
The box with the difference is the manual. I've just put an AU box in my wife's EL. All we did was swap the bell housing. |
|||
| Top | |
|||
| fiend |
|
|||
|
Thanks...
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 51 guests |
