Fordmods Logo

Re stock ECU and turbo setup 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: Re stock ECU and turbo setup
Posted: Thu Jul 05, 2012 2:50 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 2

Joined: 2nd Jul 2012

Ride: Ford Falcon AU1 Futura

Location: Auckland
New Zealand

Hi dudes, just wondering what effect the stock ECU will have when running a turbo setup on my AU1.

I work for a Ford parts place so i can get it all cheap as hell except the ECU, could i run sort of 9psi or something and just upgrade the fuel system with a 500hp pump and a R/R Regulator? Im sure i read in the guide here that i need to use a different TPS also but i cant find it?

Cheers
Top
 Profile  
 
 
 Post subject: Re: Re stock ECU and turbo setup
Posted: Thu Jul 05, 2012 10:01 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

wont work to well without a flash tune and 2 bar map sensor.. the std map sensor cuts ignition over 2 psi boost. and without a proper dyno tune the engine will just lean out, ping and melt pistons...
Top
 Profile  
 
 
 Post subject: Re: Re stock ECU and turbo setup
Posted: Thu Jul 05, 2012 11:03 pm 
Stock as a Rock
Offline
User avatar

Age: 46

Posts: 141

Joined: 6th Jul 2008

Ride: FORD FE LTD TURBO/ XE TURBO

Location: LIVERPOOL
NSW, Australia

As Troy said.
What astounds me is why people want to turbo their cars whilst leaving their ecu's alone.
You can save so much heartache and pain by saving a little more and even getting a low end ecu.
Even mega squirts aren't that pricey and can do everything a high end ecu can do.

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Re stock ECU and turbo setup
Posted: Thu Jul 05, 2012 11:10 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 2

Joined: 2nd Jul 2012

Ride: Ford Falcon AU1 Futura

Location: Auckland
New Zealand

I dont want to leave it just don't have enough cash yet. I'll just have to save lol
Top
 Profile  
 
 
 Post subject: Re: Re stock ECU and turbo setup
Posted: Sat Jul 07, 2012 3:37 pm 
Stock as a Rock
Offline
User avatar

Age: 46

Posts: 141

Joined: 6th Jul 2008

Ride: FORD FE LTD TURBO/ XE TURBO

Location: LIVERPOOL
NSW, Australia

Yeh mate
You're better off waiting a little while longer, saving and doing it right. At least you wont have the headache of pulling the car off the road or stuffing things in the process.

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Re stock ECU and turbo setup
Posted: Sat Jul 07, 2012 3:59 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

even with e series at least you can chip it and tune the standard ecu, i think on au you can aswell? but also have the ability to flash tune? maybe au 1 took a chip?

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Re stock ECU and turbo setup
Posted: Wed Jul 11, 2012 5:31 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 747

Joined: 16th Dec 2008

Gallery: 1 images

Ride: AU2 75th Anniversary Futura

Location: Adelaide
SA, Australia

Get a J3 chip for the AU ecu. Cheapest way, and should get you going.

http://www.tiperformance.com.au/index.php

 

_________________

Cheers
Shav

Top
 Profile  
 
 
 Post subject: Re: Re stock ECU and turbo setup
Posted: Thu Jul 12, 2012 10:40 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

Yes with dissy you could retard timing sp atleast it may not detonate..
J3 is cheap... Cheaper than new engine...
Colder plugs with tighter gap too...
atleast 36 / 42Lb injectors, Walbro 255 intank pump...
TUNE TUNE TUNE !!!

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 12:43 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names