Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

what size silicon joiner fits over el throttle body? 

 

Page 1 of 1 [ 14 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
dahayes
 Post subject: what size silicon joiner fits over el throttle body?
Posted: Mon Jul 23, 2012 3:30 pm 
Tyre Shredder
Offline

Posts: 376

Joined: 5th Feb 2009

Ride: Ford Falcon XG

Location: Bendigo
VIC, Australia
After exact size for correct joiner?
Thanks
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Mon Jul 23, 2012 3:44 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
3" will fit but its a tight fit...
Top
 Profile  
 
 
dahayes
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Mon Jul 23, 2012 3:50 pm 
Tyre Shredder
Offline

Posts: 376

Joined: 5th Feb 2009

Ride: Ford Falcon XG

Location: Bendigo
VIC, Australia
I musnt be trying hard enough.
Thanks
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Mon Jul 23, 2012 3:52 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
put some heat into the silicon hose to soften it a little, eg hot water...
Top
 Profile  
 
 
dahayes
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Mon Jul 23, 2012 3:53 pm 
Tyre Shredder
Offline

Posts: 376

Joined: 5th Feb 2009

Ride: Ford Falcon XG

Location: Bendigo
VIC, Australia
alright will give that a shot
Top
 Profile  
 
 
phongus
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Mon Jul 23, 2012 5:53 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia
3" fits and it is damn tight.

As mentioned before, hot water works...boiling water, even better. Just don't burn yourself

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)
Top
 Profile  
 
 
tickford_6
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Mon Jul 23, 2012 7:31 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004
3inch is tight and 3-1/4 is loose.
Top
 Profile  
 
 
SWC
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Mon Jul 23, 2012 8:37 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia
correct size is 80mm or 3 1/8". Link below for Ebay seller. I have bought from him and very happy.

http://www.ebay.com.au/itm/Silicone-Str ... 43b1e36a97
Top
 Profile  
 
 
tickford_6
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Tue Jul 24, 2012 7:36 am 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004
SWC wrote:
correct size is 80mm or 3 1/8". Link below for Ebay seller. I have bought from him and very happy.

http://www.ebay.com.au/itm/Silicone-Str ... 43b1e36a97



3-1/8 will then be loose on a 3 inch intake pipe.
Top
 Profile  
 
 
Sefton
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Tue Jul 24, 2012 10:29 am 
Stock as a Rock
Offline
User avatar

Age: 30

Posts: 189

Joined: 14th Oct 2010

Gallery: 11 images

Ride: 1991 Ford Fairmont Ghia

Location: Palmerston North
New Zealand
1) Measure diameter
2) Buy ya s**t
3) Slam dunk on
4) Hoseclamp

 

_________________

Build Thread - More of a mismatch of parts :P the-garage-f53/seftons-ea-t106586.html
Top
 Profile  
 
 
SWC
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Tue Jul 24, 2012 7:11 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia
tickford_6 wrote:
SWC wrote:
correct size is 80mm or 3 1/8". Link below for Ebay seller. I have bought from him and very happy.

http://www.ebay.com.au/itm/Silicone-Str ... 43b1e36a97



3-1/8 will then be loose on a 3 inch intake pipe.


True, the 80mm will be a little loose on a 3" pipe but he asked what size fits the TB which is 80mm. Mine use was not for a 3" pipe so didn't worry me.
Top
 Profile  
 
 
galapogos01
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Wed Jul 25, 2012 8:03 pm 
Getting Side Ways
Offline
User avatar

Posts: 1139

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia
Err...

You can buy silicone reducers. A 3.25" to 3" reducer, either straight or 90deg, works great.
Top
 Profile  
 
 
tickford_6
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Wed Jul 25, 2012 9:47 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004
You can, but if you are simply joining a 3inch intake to the TB, 3inch hose fits and isn't at all difficult to get on.
Top
 Profile  
 
 
galapogos01
 Post subject: Re: what size silicon joiner fits over el throttle body?
Posted: Wed Jul 25, 2012 10:52 pm 
Getting Side Ways
Offline
User avatar

Posts: 1139

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia
Why bother with difficult if you can just buy the right part?
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 14 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 61 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 9:51 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names