I'm just about to do this but I need to know where to get the constant 12v ignition from, the bbm solenoid has the red and green wires but as I read it you only use the green, is this right? can someone post a link to a thread that shows all this if possible *edit* never mind I found an answer, although when I hook up the vct using this method the vacuum is lost so the bbm diaphragm no longer works, had anyone had this problem? what sort of wire should I be using, I thinking maybe its too thick or something and takes away all the power the the bbm solenoid

Last edited by dalem on Fri Jul 27, 2012 7:42 pm, edited 1 time in total.

the bbm solinoid needs 12v ignition for the red wire and the green is the trigger which is a earth trigger, you can use the 12v from injectors or coil 12v, i ran the 12v ignition power from the ecu power..

thanks Troyman, I'll give it a try getting power from somewhere else, hopefully that helps