|
| bry40l |
|
|||
|
I was going to pull my lsd out of the parts car tommorrow and thought while its out id replace the oil. So I was wondering what are they ment to run and what additives if any work well at preventing slip/ wear?
_________________ BF XR6 |
|||
| Top | |
|||
| REW93N |
|
|||
|
I replaced mine about a month ago with LSX90 Castrol oil.
Anything that is 90-120 should be fine
_________________ Blue blooded. |
|||
| Top | |
|||
| bry40l |
|
|||
|
uniacidz wrote: Castrol SAF-XA 1.6L needed Nulon G70 Gearbox & Differential Treatment - 125g That's basically what i used in the falcon and currently in the SS. Castrol preferred as uses the Sturaco 7098 anti chatter similar to the Ford R178 LSD addictive or use Nulon SYN80W140 differential oil also has it. thanks mr uniacidz  removed the diff today, took about 2 hours to remove the diff from the car then dragged the diff out from under the car with tailshaft attached. couldnt undo the tailshaft bolts,spent half the day looking at air compressors to run a rattle gun($750+ just for a big enough compressor!!) ended up buying a $500 250nm electric one, still cant remove the f**k  angle grinder will be handy nekk week when im ready to fit it to my car 
_________________ BF XR6 |
|||
| Top | |
|||
| cjh |
|
|||
|
he bolts/nuts are 15mm and 18mm.....use ya muscles!!!!
I use Penrite Limslip 140 in my diffs.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| efxr6wagon |
|
||
|
Redline Synthetic 80W140 works well in Falcon diffs (http://www.redlineoil.com/product.aspx?pid=37&pcid=4). It already has the additive in it for LSDs, and is often all you need to cure a noisy diff. It's good stuff.
The heavier weight helps keep the LSD tighter longer than 75W90. If the diff is slipping more than you would like, you can use 75W140 NS (without the additive) and add Friction Modifier 5mls at a time until the chatter goes away. Drag racers use this method to "tune" their diffs.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
| Top | |
||
| bry40l |
|
|||
|
i used nulon fully synthetic 90/140, was 25 or 28 a litre
 but i generally wont bother to change diff oil(this is the first time ive ever drained/ refilled a diff before LOL) so i figured do it with good oil now and it should be ok for a while
_________________ BF XR6 |
|||
| Top | |
|||
| bry40l |
|
|||
|
well well well
 my nieghbours hate me for up to about 4 streets around my area and my diff works just fine, im not game to dump the clutch too much i just thought id put it to the test now and then ill know if its fine, i also swapped my drive shaft for the el ghia one and my car has lost vibrations in the drive line and the diff is smooth as if its just been rebuilt. for some odd reason my clutch isnt slipping  must not be as much load on it now with the lower gears, my original diff was a 3.23 open slipper which i thought was odd for a gli, thought they were mostly 3.08
_________________ BF XR6 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 63 guests |
