|
| LoganNZ |
|
||
|
Hi all, just sold my EF Fairmont and bought a nice tidy silver AU XR6.
Pretty much standard all over, except with a 10-disc CD-stacker in the boot. It has a remote wired into the cabin centre console. The boot stacker powers up, opens, allows you to load discs etc, the remote works, (has a digital display, shows what disc and track is playing), but I can't get any CD input/action to show or play on the factory head unit. I don't know a lot about in-car hi-fi - just wondering where I should start looking for the problem? When I press the "CD" button on the stereo head unit, absolutely nothing happens. E.g. if I am playing the radio and press "CD", radio keeps playing. Any ideas? Thanks.
_________________ Previous cars: |
||
| Top | |
||
| metal-mania |
|
||
|
by the sounds, the pevious owner had an aftermarket head unit. The factory heads have no input so, I recommend finding a new head unit with aux imputs, not just out puts.
|
||
| Top | |
||
| metal-mania |
|
||
|
plus the head unit and stacker should be connected so as to be able to function the stacker from the head unit. so u may need a specific head unit of if lucky and adaper
|
||
| Top | |
||
| LoganNZ |
|
||
|
metal-mania wrote: by the sounds, the pevious owner had an aftermarket head unit. The factory heads have no input If they have no CD input, then why does it have a CD function button?
_________________ Previous cars: |
||
| Top | |
||
| metal-mania |
|
||
|
i have an au sr i think they are the same stereo heads. but it just changes it from radio to cd
|
||
| Top | |
||
| metal-mania |
|
||
|
your stacker cant connect to a stock head unit if its an after market one
|
||
| Top | |
||
| LoganNZ |
|
||
|
metal-mania wrote: i have an au sr i think they are the same stereo heads. but it just changes it from radio to cd So yours can play CD's?
_________________ Previous cars: |
||
| Top | |
||
| metal-mania |
|
||
|
take the head unit out and see if the looms/ connections for the stacker are behind it. or are installed
|
||
| Top | |
||
| metal-mania |
|
||
|
yes mine did but i removed it as to update and the stocks dont play mp3 and some burnt discs
|
||
| Top | |
||
| LoganNZ |
|
||
|
metal-mania wrote: take the head unit out and see if the looms/ connections for the stacker are behind it. or are installed Do I need a special tool or those pin-things to pop the head unit out - what's the story with that one?
_________________ Previous cars: |
||
| Top | |
||
| metal-mania |
|
||
|
if its the 4 little hole 2 on either side of the unit face, what i did was found wire the same diameter as the holes, cut 2 lenths and bent each into a u making sure the ends were the same length. and pushed them in on either side so all 4 slide clips are all released at the same time. Then slid the unit out.
|
||
| Top | |
||
| LoganNZ |
|
||
|
metal-mania wrote: what i did was found wire the same diameter as the holes, cut 2 lenths Cool thanks, I'll try that. Does the unit just push back in and "click" into place when you reassemble? Cheers
_________________ Previous cars: |
||
| Top | |
||
| metal-mania |
|
||
|
It should, if its flush as u slide it back in.
I updated mine so new head unit. |
||
| Top | |
||
| metal-mania |
|
||
|
you will have to leave the wires in as you slide it out. dont pull on them to try and get the unit out they just unlock the slides.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |