i need help, droping degrees :(

Home » Forums » Fordmods Tech » ECU, Fuel System and Tuning Forum

Page 2 of 2 [ 24 posts ] Go to page Previous 1, 2

Post New Topic Post Reply

Previous topic Next topic

TROYMAN

Post subject: Re: i need help, droping degrees :(

Posted: Mon Aug 06, 2012 1:50 pm

Moderator

Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

yes map sensor from eb to el are the same, and the tfi is on the side if the dizzy,

Top

Profile

i love mud

Post subject: Re: i need help, droping degrees :(

Posted: Mon Aug 06, 2012 6:06 pm

Fordmods Newbie

Offline

Age: 32

Posts: 15

Joined: 18th Jul 2012

Ride: Rj70 Landcruiser

Location: Yeppoon
QLD, Australia

well my map sensor and tfi are connected, can the tfi become faulty easily? could a faulty tfi cause this problem? (limp mode)?

Top

Profile

i love mud

Post subject: Re: i need help, droping degrees :(

Posted: Mon Aug 06, 2012 6:18 pm

Fordmods Newbie

Offline

Age: 32

Posts: 15

Joined: 18th Jul 2012

Ride: Rj70 Landcruiser

Location: Yeppoon
QLD, Australia

if my thermo fans are not connected to the cpu can it cause the problem that i am having?

Top

Profile

ToranaGuy

Post subject: Re: i need help, droping degrees :(

Posted: Mon Aug 06, 2012 8:22 pm

Getting Side Ways

Offline

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

i love mud wrote:

if my thermo fans are not connected to the cpu can it cause the problem that i am having?

I'd be very surprised if it did, because afaik all the ecu does is to trigger the relays to turn the fans onto the appropriate speed when the coolant temp signal says it's time to turn them on.

Cheers

ToranaGuy

_________________

Top

Profile

i love mud

Post subject: Re: i need help, droping degrees :(

Posted: Mon Aug 06, 2012 8:34 pm

Fordmods Newbie

Offline

Age: 32

Posts: 15

Joined: 18th Jul 2012

Ride: Rj70 Landcruiser

Location: Yeppoon
QLD, Australia

i pulled the dizzy out and it is rooted there was movment and the cylinder was rubbing on the signal, now i believe i need a new tfi.. ill try that tomorrow and let you's know how i go

Top

Profile

ToranaGuy

Post subject: Re: i need help, droping degrees :(

Posted: Mon Aug 06, 2012 9:11 pm

Getting Side Ways

Offline

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

If the shaft in the dizzy is rooted, get a whole new one.

Cheers

ToranaGuy

_________________

Top

Profile

i love mud

Post subject: Re: i need help, droping degrees :(

Posted: Wed Aug 08, 2012 7:23 pm

Fordmods Newbie

Offline

Age: 32

Posts: 15

Joined: 18th Jul 2012

Ride: Rj70 Landcruiser

Location: Yeppoon
QLD, Australia

the ignition is cutting the revs out at 3.5 rpm any suggestions on why that would happen? please

Top

Profile

ToranaGuy

Post subject: Re: i need help, droping degrees :(

Posted: Wed Aug 08, 2012 7:42 pm

Getting Side Ways

Offline

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

If the shaft is rooted, the chopper wheel may wobble & send the wrong signal to the TFI module. Just junk that distributor, keep the gear off it & get a new distributor. Fit the original gear & then fit to your engine.

Cheers

ToranaGuy

_________________

Top

Profile

i love mud

Post subject: Re: i need help, droping degrees :(

Posted: Thu Aug 09, 2012 11:00 am

Fordmods Newbie

Offline

Age: 32

Posts: 15

Joined: 18th Jul 2012

Ride: Rj70 Landcruiser

Location: Yeppoon
QLD, Australia

Got a new dizzy fitted it and still won't go over 4.5 rpm thonking it could be fuel now

Top

Profile

Post New Topic Reply

Page 2 of 2 [ 24 posts ] Go to page Previous 1, 2

Jump to:

Home » Forums » Fordmods Tech » ECU, Fuel System and Tuning Forum

Who is online
Users browsing this forum: No registered users and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Fri Nov 22, 2024 5:15 pm

All times are UTC + 11 hours