hey guys just wondering if pedders springs are worth getting cause im after a spring size in between super lows and lows for EL XR6 for the rear.

if you find one let me know. im after the same size. lows look too high and i cant get in the driveway of my new place with superlows

I believe that XF springs end up a tad higher than their E series cousins but fit fine - ie. XF Superlow SHOULD be between E series superlow and Low - and XF Low SHOULD be somewhere between E series low and std height.

That's from experience with King springs - so I guess need to be careful about claiming it to be the same with pedders.

I have King E Series Lows in the front of my EF and XF Lows in the rear - with E Series king rear lows I've always had to fit one or two 10mm spacers to stop the car looking like it's draggin it's rear.

yeah mine has all king springs super lows all round but its a little low for my liking but then again the kings lows are abit high with the 19's on it aswell

It could be worth looking at XF Superlows then - I know for sure XF rears are a tad taller than equivalent E series and compatible - but not so sure about XF fronts.