|
| Tech90 |
|
||
|
So I'm looking around for an oil t-piece for the block to add the turbo feed line and the oil pressure sender. Now with a bit of researching the size I need is 1/4 NPT yeah? So this screws into the engine block, then how exactly do I go about adding the other 2 to the t-piece? The one I'm currently looking at is an AN 6 to 1.4" NPT T-Piece...
Any help would be great! |
||
| Top | |
||
| joshmcmillan |
|
||
|
Not sure if it's any help at all, but the part number for the BA Falcon T-Piece for the oil pressure sender is 230032... Supercheap stocks Calibre and SAAS ones in that part number.
Goodluck.
_________________ 2005 BA MKII XR6 Turbo 6 Speed Manual Xforce Exhaust, K&N Filter, C&V Tune @ 260RWKW |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Have a look in my build thread . Link is in the Sig .
1/4 bps will also work which is what I have . Make sure u use hydraulic thread sealant as it will leak. Use loctite 567 . Get a 1/4 bsp straight nipple , 1/4 bps t piece , your oil sender will screw into it also . Then to connect up the feed line . I used a -4 line . So you'll need a -4 to 1/4 bsp fitting . I brought a turbo feed line kit on eBay for my turbo and it came with everything . Except the t piece was 1/8 so I changed it to 1/4
_________________ El XR6 Turbo |
|||
| Top | |
|||
| fezlane |
|
|||
Age: 58 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
I took oil pressure sender unit to enzed and asked for a t piece to suit.
|
|||
| Top | |
|||
| Tech90 |
|
||
|
So would something like this work, and I'd just get the correct fitting for my turbo oil line to connect to this?
http://www.ebay.com.au/itm/BRASS-OIL-PR ... 1c17925f9d From what I understand it screws into the block, and then the pressure sender goes on the end of it, and the turbo oil line goes in the middle? |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
It would work but one side is 1/8.
I couldn't find any good ones on eBay . Best to go to a fluid power company like enzed or cram . If you want I can give u a t piece and fittings at the price of postage ? I can get them from work.
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
