|
mendyxr6 |
|
|||
|
Im looking at getting a new cam fitted to the Au with rpm range of 1500-4000.
Not for huge power gains but a bit more low end torque Not wanting anything huge and lumpy and prefer to not have to change lifters, springs and heads Will the Crane Cam 972834 be an improve over the standard cam with a retune The car is standard except for a full 2.5inch exhaust system
_________________ kangaroos and radiators are a bad mixture |
|||
Top | |
XR9UTE |
|
||
|
That's a flat tappet cam I'm afraid mendy. That would be a backward step. I'll try to find the specs of a comp roller that I used that would achieve what you're after but a std. cam is pretty good for torque. You may find fitting an adjustable timing set and advancing the stock cam will get you what you want.
|
||
Top | |
mendyxr6 |
|
|||
|
Il keep searching until I find what I'm chasing.
Worst case is I will leave it as is
_________________ kangaroos and radiators are a bad mixture |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 34 guests |