something about brand new genuine parts that i love.....

good stuff this thing will hande and stop how it should have from factory.

When you are ready George, Text me and i can drop around to help you fit all your goodies.

It would be my pleasure mate. Hope you are getting better and speak soon.

Brett

Thanks very much Brett and yes, I am feeling muhc better, it looks like the Doctors have figured it out this time as my Ulcer IS healing and the cellulitus has receeded.


I agree, they always look good

That is great news George, glad to hear you are on the mend.

Last week I finally got around to doing some work to the beast. I changed the Injectors, fuel pressure regulator, PCV and inlet manifold Gasket.
I put everything back together and it started first go but ran as rough as buggery, I couldn't think of anything I had left off or forgotten to plug back in but it still ran terrible. Yesterday I decided to remove the plugs and yes, they were all carboned up so I cleaned them, put them back in and made sure all the leads were plugged into the coil correctly. I then checked all the bolts in the manifold and the vacuum lines then I thought I might look at the new regulator and when I got it out there was such much s**t in there that I was pulling pieces of what looked like grease gunk, all were cleaned.

After all of this I put everything back and started it, yahoo it works.

All I have to do now is get the motivation to do the front and rear suspension, front and rear brakes and the new booster/master cylinder. More to follow, next time with pics.

hey mate how did you go fitting that pile of goodies? I see you have backing plates off a BA? Are you intending to run BA ute rear brakes? I had that same idea but my project has a fair way to go before I need these

Well, I have done the Front and rear suspension and so it is ready for a rego check.
Later on I will tackle the brakes, may be after I come back from America, late November.