|
| Vic |
|
|||
|
Reposting this from the V8 category.
I need another intermediate shaft for my EL and of course Ford no longer produce these parts. I believe I have tried Bursons etc in the past but no joy. Does anyone know if aftermarket intermediate shafts are available and if so, where from?
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
Vic, As far as I am aware, nobody is doing aftermarket or refurbished intermediate shafts. Best option is finding one out of a wreck and hope for the best. then become a tightass and start stockpiling the f**k.
_________________
|
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
Intermediate shaft? Do you mean tail shaft? You can get them reconditioned.
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
Nah, intermediate shaft from steering column to the rack.
They are getting rare.
_________________
|
|||
| Top | |
|||
| cjh |
|
|||
|
Ford stopped doing them about 5 years ago now.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
{USERNAME} wrote: Nah, intermediate shaft from steering column to the rack. They are getting rare. Ah, steering intermediate shaft. Couldn't one be reconditioned with new pins & bushes if you were desperate? I know I've thrown a few good ones out when car's go to scrap, so I should start keeping them shouldn't I? Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| Vic |
|
|||
|
This is the second one I've worn out and it lasted only a few years from the heat of the headers and I got it from Ford just before they stopped selling e-series parts.
I'm still hopeful that someone is doing an aftermarket version.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
gearbox-suspension-brake-driveline-f4/el-falcon-steering-universal-joint-t100861.html
fordmods-technical-documents-diy-f38/ask-papa-smurf-about-genuine-ford-parts-t82779-1875.html http://stores.ebay.com.au/Textile-Techn ... 4340.l2563
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Vic |
|
|||
|
I had the shaft welded.
Sorted. 
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
So what was actually welded ??
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| SWC |
|
||
|
I take it that there was play in the pin where the bottom Uni Joint connects?
|
||
| Top | |
||
| Vic |
|
|||||
|
The uni joint itself was in fact fine, no wear in its movement.
The smaller pin underneath it ( in the attachment below ) was worn and received a couple of welds. This saved me over $200 in finding another new intermediate shaft. ~ Incidentally, yes, the V8 shaft was about an inch shorter than the I6 shaft.
_________________ 5.6L of carbon footprint. |
|||||
| Top | |
|||||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
