|
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
nah i mean like is the vacuum actuated leaking etc
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| wild-el |
|
||
|
well getting the rotor button and dizzy cap changed tomorrow.if it doesnt make a difference thenill have to hook her up to a diagnostic computer.see what the f**k else is going on i dont think it could be the plugs.but ill change them too
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| wild-el |
|
||
|
got my mates uncle to change the dizzy cap and rotor button but he said the problem might my dizzy and the little gear down the bottom.im going to take off my spark plugs to check how rooted they are because he reckons im not getting spark to no.1 piston so ill check them now.
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| bry40l |
|
|||
|
that has nothing to do with the gear on the distributor, if that gear did anything to affect the way your car ran it would either be the dizzy isnt adjusted rite and them timings out, or if the gear is stripped than none of the spark plugs would be getting spark,
_________________ BF XR6 |
|||
| Top | |
|||
| TROYMAN |
|
||
|
bry40l wrote: that has nothing to do with the gear on the distributor, if that gear did anything to affect the way your car ran it would either be the dizzy isnt adjusted rite and them timings out, or if the gear is stripped than none of the spark plugs would be getting spark, actually it can have a huge effect on how the car runs, but only if the gear is chewing out... i had huge missing and breaking down issues with my old ea which had an au engine in it, and after extensive fault finding and trial and error it was the aux shaft chewing out.. unfortunatly it was terminal as the amount of metal that was circulated through the engine was not worth fixing.. hopefully its not the case though.... |
||
| Top | |
||
| bry40l |
|
|||
|
hmm well there ya go i may be wrong lol, maybe pull the dizzy out and see if its a chinese one or if its genuine bosch and then have a look down the hole, also look at the gear on the dizzy shaft, when i stuck a torch over the hole of my els buggered motor you could see the metal shavings sitting inside the hole, could stick your finger around the hole and feel them so maybe its worth pulling it out and having a decent look incase it is what troyman said
_________________ BF XR6 |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
A failed Aux gear is a pretty spectacular thing, once the dizzy is pulled its easy to diagnose.
_________________
|
|||
| Top | |
|||
| SWC |
|
||
|
When you fitted the AU motor, did you swap over the gear from the oil pump drive on the AU motor to your dizzy?
|
||
| Top | |
||
| wild-el |
|
||
|
SWC wrote: When you fitted the AU motor, did you swap over the gear from the oil pump drive on the AU motor to your dizzy? i wouldnt have a clue mate the mechanic did it all for me.what do you have to do mate??
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| SWC |
|
||
|
Gears that were in the AU motor matched, I would say that the Aux gear or dizzy gear is stuffed or on the way out. Miss-matched gears are not great idea and have in the past caused Aux gears and or Dizzy gears to fail. Pull the dizzy out and check the gear, look down the hole and check the Aux gear. See how they look, check the teeth for wear.
|
||
| Top | |
||
| MAD |
|
|||
|
What did this turn out to be?
My car was doing this exact thing just recently, but today decided to pack in and stop all together. I suspect it's the TFI or hall sensor, as the fuel pump will prime, but not run while cranking. If I turn key quick enough and get it to crank while the pump is still priming, it will start for a second. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 53 guests |
