|
| zxhoon |
|
||
|
bump - any chance of getting the images back for this? I'm happy to host them somewhere for everyone...
Im trying to track down as many stereo installs in EFs as I can to get an idea of what to do with mine.... Cheers, Stu oh ps elfalcoon leave the cap hooked up it should turn off after a while of no activity.... give it 5-10 minutes and see if its still on... |
||
| Top | |
||
| pyroay |
|
|||
Age: 44 Posts: 2121 Joined: 14th Dec 2004 Ride: FG Turbo Territoty Ghia Location: Traralgon |
email me at
aaron.young@silcar.com.au I will try and dig up the pics.
_________________
Last edited by pyroay on Wed Oct 03, 2007 4:21 pm, edited 1 time in total. |
|||
| Top | |
|||
| zxhoon |
|
||
|
Email bounced back to me...
if you find the pics email me stuartghall@hotmail.com or stuartghall@gmail.com and ill upload them and put the links up for you.. cheers, Stu |
||
| Top | |
||
| scarecrow420 |
|
||
|
bump... this is an awesome thread but it would be really helpful to see the missing pics! If you do use the 12mm spacers, do you have clearance problems with the inside of the door trim?
|
||
| Top | |
||
| pyroay |
|
|||
Age: 44 Posts: 2121 Joined: 14th Dec 2004 Ride: FG Turbo Territoty Ghia Location: Traralgon |
No thats why 12mm is the way to go, any larger and you do have issues.
I offered the pics to be hosted by fordmods they said they'd get around to it.
_________________
|
|||
| Top | |
|||
| surtees |
|
||
|
I'm using speaker wire to power the sub instead of 12 or 10 gauge. How much improvement would I get if I switched to 12 gauge? thanks
_________________ Have you driven a ford lately?
|
||
| Top | |
||
| pyroay |
|
|||
Age: 44 Posts: 2121 Joined: 14th Dec 2004 Ride: FG Turbo Territoty Ghia Location: Traralgon |
10 and 12 gauge are spealker wire, gauge simply refers to their thickness.
Do you mean from the amp to the sub? how much power are you delivering to the sub? what length is the cable run?
_________________
|
|||
| Top | |
|||
| surtees |
|
||
|
Yes I mean the amp to the sub my lead would be just under a metre. Here are the specs from my amp it's a JBL amplifier. Would the higher figuare be for my sub?
Grand Touring Series GTO755.6 General Power Output 60 Watts RMS x 4 channels + 107 watts RMS x 2 channels at 4 ohms and ≤ 1% THD + N 160 Watts x 2 + 300 watts x 1 at 4 ohms, 14.4V supply and ≤ 1% THD + N 117 watts (channels 1, 2, 3, 4), 163 watts (channels 5, 6) at 2 ohms Signal-to-Noise Ratio 79dBA (reference 1 watt into 4 ohms) Effective Damping Factor 6.392 at 4 ohms Frequency Response 10Hz – 47kHz (channels 1, 2, 3, 4), 10Hz – 302Hz (channels 5, 6) Maximum input signal 6V Maximum sensitivity 250mV Output regulation 0.042dB at 4 ohms 12dB Built-in, variable, low-pass electronic crossover Separate high-level and low-level inputs Remote bass-level control (optional) Dimensions (H x W x D) 475mm x 313mm x 60mm
_________________ Have you driven a ford lately?
|
||
| Top | |
||
| pyroay |
|
|||
Age: 44 Posts: 2121 Joined: 14th Dec 2004 Ride: FG Turbo Territoty Ghia Location: Traralgon |
Any reasonable speaker cable will be fine for an amp of that power.
_________________
|
|||
| Top | |
|||
| surtees |
|
||
|
thanks for that. What projects do you have on the go at the moment?
_________________ Have you driven a ford lately?
|
||
| Top | |
||
| pyroay |
|
|||
Age: 44 Posts: 2121 Joined: 14th Dec 2004 Ride: FG Turbo Territoty Ghia Location: Traralgon |
Family project...... Also expanding the lgihting business.
Nothing car related.
_________________
|
|||
| Top | |
|||
| fiend |
|
|||
|
Hi - Just a quick message to say I put 6x9's in standard EF front doors and surpassed the upper limit of depth. They still work, and the windows still go up and down, so all good.
Have been searching around FORDMODS for hours now looking for a stereo plug wiring map, diagram or picture. Hells bells, what has happened here? I cannot seem to find anything simple any more! |
|||
| Top | |
|||
| luckyfly |
|
||
Age: 52 Posts: 14 Joined: 13th Jan 2010 Ride: BF II, XR6 - Taxi with a skirt Location: Perth |
Thankyou, great read. I did post on several other tutorial threads that do not work. Shame you obviously put considerable time and effort to create them. Hope they are fixed soon. Cheers Brad.
|
||
| Top | |
||
| FordAUte |
|
||
|
I'm thinking of running 2 x mono block 850rms and 1 x 4 channel amp (unsure of 4 channel details as of yet - haven't got that far) in my FG XT... As far as getting a signal to the amps, can I put rear left/rear right respectively to each mono then run the 4 channel from the front signals? Of will that not be right? Is it a matter of any signal will do? Or does it have to be of a certain power/or something else?
_________________ "08 XR6T Ute |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
