|
| 1tuff |
|
||
|
I'm installing electric water pump on my 95 ef, when the old belt drive pump was on there I had a hose from the thermostat and also a hose from the heater valve to it, now I have the electric pump do I just block off these two hose's or do I need to redirect them somewhere?
_________________ To many project's and not enough $$$ |
||
| Top | |
||
| EFFalcon |
|
|||
|
do you want a heater?
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| 1tuff |
|
||
|
I c u live in melbourne so I will ask u would u want a heater?
_________________ To many project's and not enough $$$ |
||
| Top | |
||
| EFFalcon |
|
|||
|
Then yes, you need to hook those lines up in some manner.
without them you have no heater.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| 1tuff |
|
||
|
So any suggestions on where I might plumb them back into the system, as far as I can make out they look as if they where feeds off the pump.
_________________ To many project's and not enough $$$ |
||
| Top | |
||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
gut out the impeller of the mechanical water pump. Then just leave as is.
All the hoses will function as normal. |
|||
| Top | |
|||
| 1tuff |
|
||
|
Im using a pump that just runs out of the block and back in that doesnt have any feed holes of it.
_________________ To many project's and not enough $$$ |
||
| Top | |
||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
you got any pics of the setup?
|
|||
| Top | |
|||
| 1tuff |
|
||
|
[img]C:\Users\user\Pictures\2012_11_28\janet\new%20pump1.JPG[/img][img]C:\Users\user\Pictures\2012_11_28\janet\new%20pump%2021.JPG[/img] these are pic's of new water pump[img]C:\Users\user\Pictures\2012_11_28\janet\night_train1.JPG[/img] this is the old pump and you can see the two feeder outlets' top went to the thermostat and the other to the heater valve.
_________________ To many project's and not enough $$$ |
||
| Top | |
||
| 1tuff |
|
||
|
that didnt quite work, how do I upload the photo's?
_________________ To many project's and not enough $$$ |
||
| Top | |
||
| 1tuff |
|
||
|
ok, couldnt get them in the post, but did upload the pics to my gallery
_________________ To many project's and not enough $$$ |
||
| Top | |
||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
gut the impeller out of the old water pump. This means there's no demand on the engine & the water pump will use very minimal engine energy if not none. It will more or less just be another pulley for the serpentine to rest on.
Then hook up the electric water pump so it pumps water into the mechanical water pump inlet port. 1. bottom radiator hose to inlet of electric water pump 2. outlet of electric water pump to inlet of the gutted mechanical water pump 3. there's a heater hose that connects to the heater pipe from the mech water pump (small bottom outlet) 4. there's a heater bypass hose on the mech water pump that connects to the block (small top outlet) |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 47 guests |
