Fordmods Logo

What can I do about this wiring? 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: What can I do about this wiring?
Posted: Fri Dec 07, 2012 5:12 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1349

Joined: 21st Dec 2004

Gallery: 40 images

Ride: EF GLi/Ghia bitsa

Location: Melbourne
VIC, Australia

Hey, my alternator wiring was a bit loose for awhile, and it's become all corroded and the terminal came off it. Now I have a green corroded bit of wire and a dodgy terminal that I have carefully removed all the wire from. I havent seen ring terminals as large as this for sale in places like autobarn or even Bursons, so I dont know where to get ring terminals big enough. I've attatched pictures, what's the best way to fix this issue?

Gab

Image

Image
Top
 Profile  
 
 
 Post subject: Re: What can I do about this wiring?
Posted: Fri Dec 07, 2012 10:20 pm 
Fordmods Newbie
Offline

Posts: 15

Joined: 24th Nov 2012

Ride: XR8 ute

Location: Melbourne
VIC, Australia

Try Jaycar, or the audio section of Autobarn, etc.
That wire is stuffed. If you have enough length, cut it back to some fresh copper, if not you'll have to cut off that section and solder a new length on.
Top
 Profile  
 
 
 Post subject: Re: What can I do about this wiring?
Posted: Sat Dec 08, 2012 4:55 am 
Fordmods Newbie
Offline

Age: 56

Posts: 18

Joined: 30th Dec 2011

Ride: Falcon BA 2004

Location: Airlie Beach
QLD, Australia

There's nothing wrong this the wire. Just soak it in white vinegar or some battery acid and it will clean right up...The vinegar will take longer to clean as it's a much weaker acid.
Top
 Profile  
 
 
 Post subject: Re: What can I do about this wiring?
Posted: Sat Dec 08, 2012 6:53 am 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

{USERNAME} wrote:
There's nothing wrong this the wire. Just soak it in white vinegar or some battery acid and it will clean right up...The vinegar will take longer to clean as it's a much weaker acid.


Mix some salt with the vinegar and it will work better.
Top
 Profile  
 
 
 Post subject: Re: What can I do about this wiring?
Posted: Sat Dec 08, 2012 11:47 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1349

Joined: 21st Dec 2004

Gallery: 40 images

Ride: EF GLi/Ghia bitsa

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
{USERNAME} wrote:
There's nothing wrong this the wire. Just soak it in white vinegar or some battery acid and it will clean right up...The vinegar will take longer to clean as it's a much weaker acid.


Mix some salt with the vinegar and it will work better.


Sounds tasty...lol, but seriously, good idea !
Top
 Profile  
 
 
 Post subject: Re: What can I do about this wiring?
Posted: Sat Dec 08, 2012 1:21 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

Yeah, that wire will clean up okay - you can even try a small fine wire brush.
A domestic electrical mob should have crimps that size, maybe Bunnings too - autoelectrician also as a last resort.
You'll need a proper crimper as well - pliers won't do it properly - needs all round crimping, not just squeezing.
Wherever you get the crimp from, if you bring your wire in prepped and ready to go, they might crimp it for you too.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
 Post subject: Re: What can I do about this wiring?
Posted: Sat Dec 08, 2012 3:12 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

Wouldn't a Yellow quick crimp with 6mm ring go on that?

 

_________________

Current ride: MY03 Liberty RX Wagon
{DESCRIPTION} Moved on to greener pastures...

Top
 Profile  
 
 
 Post subject: Re: What can I do about this wiring?
Posted: Sat Dec 08, 2012 3:37 pm 
Getting Side Ways
Offline
User avatar

Posts: 1139

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia

If you can't get another terminal, it's probably fine to reuse that one, as long as you solder the wire into the terminal.
Top
 Profile  
 
 
 Post subject: Re: What can I do about this wiring?
Posted: Sat Dec 08, 2012 5:02 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1349

Joined: 21st Dec 2004

Gallery: 40 images

Ride: EF GLi/Ghia bitsa

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
Wouldn't a Yellow quick crimp with 6mm ring go on that?


Nah that's a bit too small

Gab
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
cron

 

 

It is currently Mon Dec 23, 2024 3:53 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names