|
| TRUEBLUEF |
|
||
|
HI whats the easy way to go to push more power out of a tickford 6 i have extractors and sports exhaust im after more bits and peices to do to it lol
_________________ [img]C:\Users\LEVO\Desktop[/img] |
||
| Top | |
||
| TRUEBLUEF |
|
||||
|
its an ef gli which i have striped it and put all the xr6 interior and bits of the exterior on to it within the last year of owning it
_________________ [img]C:\Users\LEVO\Desktop[/img] |
||||
| Top | |
||||
| GeZza200 |
|
||
|
How far do you want to go with the car? Keep it NA or you want to turbo it later?
If NA your next step would be a bigger intake, cam upgrade and a J3 chip dyno tuned.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| BenJ |
|
||
|
I have a wade 1673 cam I no longer have a need for.
That should give it some more go, without sacrificing drive ability, and works without a tune. A J3 Chip to suit would be more beneficial though. PM me if you want more info. Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| GeZza200 |
|
||
|
I had that cam in my car with intake/exhaust mods with a J3 dyno tuned and it made ~145rwkw. Did high 14's down the quarter, was nice and torquey as well.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| TRUEBLUEF |
|
||
|
it has the el intake pipe, k&n filter & big mouth allready
_________________ [img]C:\Users\LEVO\Desktop[/img] |
||
| Top | |
||
| 79 raven |
|
|||
|
au injectors, cam as said and J3
|
|||
| Top | |
|||
| Esteven8 |
|
|||
|
I'd also suggest the BA or Territory intake piping from airbox to throttle body over the EL/AU type.. Hell, even the original EF BBQ plate intake flows better than the EL/AU.
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| GeZza200 |
|
||
|
next time i take mine to the dyno I will bring a 3" stainless pipe, EL pipe and Ef intake and see which makes the most power I dont reckon the EL an EF will show any difference
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| 79 raven |
|
|||
|
GeZza200 wrote: next time i take mine to the dyno I will bring a 3" stainless pipe, EL pipe and Ef intake and see which makes the most power I dont reckon the EL an EF will show any difference I dont know if its been done before but that would be interesting. I was told the BBQ plate was better than the El/Au direct pipe and thats why I have kept the BBQ plate, but I am only going on advise and not spec's so Id be interested in the outcome |
|||
| Top | |
|||
| BenJ |
|
||
|
EF has an 80mm trumpeted exit from the air box lid, the EL and AU have a 50mm exit.
Makes a fair bit of difference. Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| Esteven8 |
|
|||
|
BenJ wrote: EF has an 80mm trumpeted exit from the air box lid, the EL and AU have a 50mm exit. Makes a fair bit of difference. Cheers BenJ Also the EF intake has a nice smooth curve in towards the throttlebody (As does the BA/F & Territory) rather than the relatively sharp bend the EL/AU setup has. Air flows MUCH better trough a curved pipe than it does hitting a sudden bend. I've used all 3 intakes (EF/EL/BA) in the wagon and I noticed the EL one just wasn't as responsive as the EF BBQ plate, while the BA setup was a very noticeable difference in throttle response. Probably does sweet F.A. in regards to overall power increase (minimal, if any at all) but she certainly picks up revs better. In my opinion all the EL/AU setup does over the EF is tidy up the top of the motor. But as per my original post, it would be worthwhile hunting down BA intake piping and an EF airbox.
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| BenJ |
|
||
|
I now have a Territory Intake between the Throttle Body and EF Airbox in my EB.
Best bang for your buck using factory parts. Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 58 guests |
