ok had some free time today so put a mutlimetre on some stuff, MAF sensor is sitting at 0.15v with ign onto ON, runs at 1.13v on idle and goes to 3.58v with a quick rev. TPS is sitting at 0.97v on idle and goes up as it should.

anything else i should look at, does anyone know what the correct voltages are for everything

Oxygen sensors could be stuffed, that'll make it run rich.

Gab

PS: 1000 POSTS !

gratz on 1000, iv put new sensors in, ill check the voltage at the sensor and at the ecu just a paint getting down to the sensors in the 8, not only is it rich its really rough, when in gear feel like the worlds biggest cam, pitty its not or i would not be worried